30cal accuracy issues |
Post Reply | Page <123> |
Author | |
Freddiefx
Member Joined: 27 Apr 2023 Location: Rotorua Status: Offline Posts: 10 |
Post Options
Thanks(0)
|
Thanks for the welcome! Yes, definitely great advise. Will certainly update after I've had another play with it. Cheers.
|
|
Freddiefx
Member Joined: 27 Apr 2023 Location: Rotorua Status: Offline Posts: 10 |
Post Options
Thanks(0)
|
Why I thought they were all gas piston was a review on YouTube. The narrator said they were springers pre production then Hatsan made the decision to go gas piston. Maybe that only applies to the US. Also, I asked the question of Delta Mike in Invercargill. They said gas piston. I dunno. Confusion reigns!
|
|
mercs
Senior Member Joined: 24 Apr 2020 Location: Stratford Status: Offline Posts: 272 |
Post Options
Thanks(0)
|
My 135 is a spring powered and that is the model I was after. Yes first one was quickly returned and replaced within three days including delivery.
I look for the longest warranty and judge on manufacturers response, I expect to return a small percentage of the mass manufacturers products and never hesitate to do so. I prefer a face to face sale and am very well served by our local Magnum Sports store here at Stratford. With optics especially I have moved to lifetime warranty products and managed to stay in economical price range due to very competitive market i expect. I respect the warranty and follow manufacturers requirements for the required duration. Prompt replacements that have impressed. Gamo rifle and scope Hatsan rifle Stealth scope Tasco scope |
|
Ralph
Groupie Joined: 20 Sep 2022 Location: Orewa Status: Offline Posts: 51 |
Post Options
Thanks(0)
|
Mercs from what I can see the Hatsan warranty in NZ is 12mnths. Have you had any other issues appart from the loose barrel on the first rifle ?
|
|
Sig Sauer ASP20 .177
|
|
Billbobnz
Senior Member Joined: 13 Jun 2020 Location: Ashburton Status: Offline Posts: 867 |
Post Options
Thanks(0)
|
If it doesn't have vortex it's spring. I thought all the nz ones were vortex but obviously not.
Hatsan vortex pistons are the only airguns using air in the piston, therefore they are able to be rebuilt. Gas rams are normally nitrogen filled. I brought mine from airrifle.co.nz all theirs are listed as vortex versions. They have been out of stock for a long time so wonder if they lost the agency for Hatsan. I enquired several times for spare parts and never heard back..... |
|
Freddiefx
Member Joined: 27 Apr 2023 Location: Rotorua Status: Offline Posts: 10 |
Post Options
Thanks(0)
|
So what you guys are saying is if it doesn't have vortex on the barrel it's a springer? I'm not disagreeing but I am confused. This link is to a nz airgun website. It shows the rifle I have. The barrel doesn't say vortex, but in their spiel it says...vortex. Is there a way to tell without pulling the gun apart?
https://airrifle.co.nz/hatsan/135-qe-30.html Edited by Freddiefx - 28 Apr 2023 at 10:45pm |
|
Billbobnz
Senior Member Joined: 13 Jun 2020 Location: Ashburton Status: Offline Posts: 867 |
Post Options
Thanks(0)
|
Have a peek underneath where you can see the cocking arm going to the piston, you may be able to see a spring if it's the spring version but you will probably need to take the stock off.
If you do take the stock off take detailed photos o photos and upload them for us to see |
|
kruzaroad
Senior Member Joined: 02 Jul 2022 Location: Hastings 4 now Status: Offline Posts: 2284 |
Post Options
Thanks(0)
|
Wouldn't the cocking sound tell you?
There's no way you can miss the sound of the gas ram on the sig compared to either the tx or gamo spring I had. |
|
Freddiefx
Member Joined: 27 Apr 2023 Location: Rotorua Status: Offline Posts: 10 |
Post Options
Thanks(0)
|
I also have a Diana ntec magnum and there doesn't seem to be any noticeable difference in the sound between it and the hatsan when cocking.
|
|
kruzaroad
Senior Member Joined: 02 Jul 2022 Location: Hastings 4 now Status: Offline Posts: 2284 |
Post Options
Thanks(0)
|
Ive been looking all over the Web and I can't find a definitive way to tell with out taking the stock off.
My next sujestions would be get the serial number and write to hatsan customer service and ask them If they stopped making spring versions they should be able to tell from serial number. Everything I've read on the spring version seems to be as good as gas ram. |
|
Post Reply | Page <123> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |