Kiwi Airgunners Homepage
Forum Home Forum Home > Target Shooting and Clubs > Target Shooting
  New Posts New Posts RSS Feed - Plinking targets.
  FAQ FAQ  Forum Search   Register Register  Login Login

Plinking targets.

 Post Reply Post Reply
Author
Message
RangerPete View Drop Down
Senior Member
Senior Member
Avatar

Joined: 18 Apr 2023
Location: Cambridge.
Status: Offline
Posts: 884
Post Options Post Options   Thanks (1) Thanks(1)   Quote RangerPete Quote  Post ReplyReply Direct Link To This Post Topic: Plinking targets.
    Posted: 17 Jun 2023 at 7:50pm
Besides the immortal beer can, what do you folks use for your favorite plinking targets?

Any home made specials, targets that have lasted for ever, cheap and nastys, or very good value for money plinking targets you have to show and share?


I made these from scrap metal found on the farm a few years ago. They worked like a bomb, many hours of fun.
Unfortunately I dont have them anymore.

But I did make these today. The little 15mm ones will be good practise for ratting at 15m, the 25mm good for rabbit practise at 30m, and I have two 40mm ones I’m still finishing.

Walk quietly, but carry a big stick.
Back to Top
Pauly5 View Drop Down
Forum Moderator
Forum Moderator
Avatar

Joined: 10 Mar 2013
Location: Titahi Bay
Status: Offline
Posts: 1409
Post Options Post Options   Thanks (1) Thanks(1)   Quote Pauly5 Quote  Post ReplyReply Direct Link To This Post Posted: 17 Jun 2023 at 9:40pm
I like shooting spinner targets, they make a good sound.

I used to enjoy shooting FT before the govt changed the rules making it very hard, but I do enjoy shooting knock over targets. Typically they have a string to pull them back up, but I had made a remote control restting one, so I only had to push a button, and they reset. 




Edited by Pauly5 - 17 Jun 2023 at 9:41pm
Back to Top
RangerPete View Drop Down
Senior Member
Senior Member
Avatar

Joined: 18 Apr 2023
Location: Cambridge.
Status: Offline
Posts: 884
Post Options Post Options   Thanks (0) Thanks(0)   Quote RangerPete Quote  Post ReplyReply Direct Link To This Post Posted: 17 Jun 2023 at 10:05pm
Remote control 😂 I like that.

I like targets that give you an immediate reaction and also deflect the pellet down, just makes sence from a saftey point of view 👍🏻
I also like targets that “reset” them selves with just a bit of gravity, can take shot after shot, and will hopefully last for years.
Walk quietly, but carry a big stick.
Back to Top
RangerPete View Drop Down
Senior Member
Senior Member
Avatar

Joined: 18 Apr 2023
Location: Cambridge.
Status: Offline
Posts: 884
Post Options Post Options   Thanks (0) Thanks(0)   Quote RangerPete Quote  Post ReplyReply Direct Link To This Post Posted: 18 Jun 2023 at 8:51pm
I finished the bigger swinging target today, and also made some “place anywhere and quickly” bases for a few other swinging targets.



Doing a quick cost comparison of the home made targets vs the store bought ones.

Homemade.
Bought the 6 little swinging targets (metal disks) from trade me for $20.
Bought M4 nuts, blots and washers $30
Wood for free from Miter10 off cuts bin.
A few wood screws I had already.
Total cost $50 for 3 targets, each with 2 swingers.
Expected life span, 2 years???

Store bought.
$35 for a premade swinger target from hunting and fishing.
A few wood screws I had already.
Wood for free from Miter10 off cuts box.
Total cost $35 for one target with 3 or 4 swingers.
Expected life span, 5 years???

Seems the store bought ones might end up being the better value for money in the long run 🤔

I know there are cheaper “re-settable” swinging targets for sale on trade me for $16-$20, but I have my doubts about the thickness of the little metal disks. I’ve had cheep ones before and the disks just dent and bend even when hit with a sub12fpe .177 🤔 and then u still need to pay $15 for shipping, which ringed u up to about the same price as a decent one from h&f, so so far I haven’t been brave enough to try the cheep trade me ones…
Walk quietly, but carry a big stick.
Back to Top
Pauly5 View Drop Down
Forum Moderator
Forum Moderator
Avatar

Joined: 10 Mar 2013
Location: Titahi Bay
Status: Offline
Posts: 1409
Post Options Post Options   Thanks (0) Thanks(0)   Quote Pauly5 Quote  Post ReplyReply Direct Link To This Post Posted: 18 Jun 2023 at 9:45pm

Nice stuff Pete.


Here's a video of the remote resetting target I made a while ago.

I've tested them out to 60m without any issue. They can be placed in one spot and as long as you have the remote you're all set.

https://youtube.com/shorts/I2bmamNAD6A?feature=share4



Edited by Pauly5 - 18 Jun 2023 at 9:47pm
Back to Top
J-S View Drop Down
Senior Member
Senior Member


Joined: 19 Oct 2014
Location: Auckland
Status: Offline
Posts: 425
Post Options Post Options   Thanks (0) Thanks(0)   Quote J-S Quote  Post ReplyReply Direct Link To This Post Posted: 19 Jun 2023 at 10:23am
Originally posted by Pauly5 Pauly5 wrote:


Nice stuff Pete.


Here's a video of the remote resetting target I made a while ago.

I've tested them out to 60m without any issue. They can be placed in one spot and as long as you have the remote you're all set.

https://youtube.com/shorts/I2bmamNAD6A?feature=share4



This is awesome..
J S Airguns
Air Arms TX200('s)
Theoben Sirocco
HW77
FWB 300s
Webley Patriot
One or two others...

Current projects:
Too many..
Back to Top
mercs View Drop Down
Senior Member
Senior Member
Avatar

Joined: 24 Apr 2020
Location: Stratford
Status: Offline
Posts: 272
Post Options Post Options   Thanks (0) Thanks(0)   Quote mercs Quote  Post ReplyReply Direct Link To This Post Posted: 19 Jun 2023 at 8:56pm
Remington's, you reset by shooting the lower paddle. I have several that live outdoors and they just need a touch of oil occasionally.

I will get a pic of them setup, slightly more of a challenge to reset than drop.

Ok for 20ft/lbs when out at 25 yards.

 



Getting up around $70
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 10.14
Copyright ©2001-2012 Web Wiz Ltd.

This page was generated in 0.051 seconds.