![]() |
Fx Wildcat mk3 |
Post Reply ![]() |
Page <1234> |
Author | |
Pauly5 ![]() Forum Moderator ![]() ![]() Joined: 11 Mar 2013 Location: Titahi Bay Status: Offline Posts: 1527 |
![]() ![]() ![]() ![]() ![]() |
Yea, was going to suggest that. I had wondered if gauge was off, but that's too much difference.
|
|
![]() |
|
flock ![]() Senior Member ![]() Joined: 28 Jan 2022 Location: Christchurch Status: Offline Posts: 100 |
![]() ![]() ![]() ![]() ![]() |
Done that, one Side mark P other S so now have the S slug side down, did give me slightly more bang. surprised when I looked down the barrel it appeared rifled all the way down, was expecting the breech end to be smooth. Chrony seems to be erratic, does read lot, error signs coming up. Put a pellet into a piece of 4by2 & pentation was twist as deep as when I first got it, so will source another chrony to test.
|
|
![]() |
|
xyon ![]() Senior Member ![]() ![]() Joined: 21 Dec 2016 Location: Canterbury Status: Offline Posts: 135 |
![]() ![]() ![]() ![]() ![]() |
woulf you like to bring it round to my place and we can have a look. I have an FX chrony to compare with
|
|
---
My favourites springer - Diana 52 PCP - FX Wildcat III |
|
![]() |
|
flock ![]() Senior Member ![]() Joined: 28 Jan 2022 Location: Christchurch Status: Offline Posts: 100 |
![]() ![]() ![]() ![]() ![]() |
Mate that would be awesome, give me a time & day that suits,
![]() |
|
![]() |
|
flock ![]() Senior Member ![]() Joined: 28 Jan 2022 Location: Christchurch Status: Offline Posts: 100 |
![]() ![]() ![]() ![]() ![]() |
Just wishing to thank XYON for his time today, spent a couple of hours sorting out the mess my Wildcat was in. With a decent chrony / tuning my way over cranked reg settings. I now have the magic 900fps and am not wasting air achieving it. Many Thanks again
|
|
![]() |
|
Pauly5 ![]() Forum Moderator ![]() ![]() Joined: 11 Mar 2013 Location: Titahi Bay Status: Offline Posts: 1527 |
![]() ![]() ![]() ![]() ![]() |
Great to hear. A chrony is really important for your air rifle.
What did you end up setting the reg at? |
|
![]() |
|
flock ![]() Senior Member ![]() Joined: 28 Jan 2022 Location: Christchurch Status: Offline Posts: 100 |
![]() ![]() ![]() ![]() ![]() |
Back to where it was to start with, slightly under 100 plus hammer spring tension backed off heaps also as well.
|
|
![]() |
|
flock ![]() Senior Member ![]() Joined: 28 Jan 2022 Location: Christchurch Status: Offline Posts: 100 |
![]() ![]() ![]() ![]() ![]() |
Also turned the barrel back around to the pellet setting.
|
|
![]() |
|
flock ![]() Senior Member ![]() Joined: 28 Jan 2022 Location: Christchurch Status: Offline Posts: 100 |
![]() ![]() ![]() ![]() ![]() |
Sighted in today, got it all good for 50M then messed with the zero stop had to start again bugger. Back to 25M with 1 mrad high hold gives me a 50M zero all set with the zero lock. Finished at 25 check check at 50 all good. Surprise was the 16g pellets at setting 6 1 off max, speed should be 900ish seemed to like these.
![]() |
|
![]() |
|
xyon ![]() Senior Member ![]() ![]() Joined: 21 Dec 2016 Location: Canterbury Status: Offline Posts: 135 |
![]() ![]() ![]() ![]() ![]() |
Great, looks accurate 👍 with those 16gr jsb's
|
|
---
My favourites springer - Diana 52 PCP - FX Wildcat III |
|
![]() |
Post Reply ![]() |
Page <1234> |
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |