Your favorite guns under $500 |
Post Reply | Page <123> |
Author | ||||||||||||||||||||||||||||||||
kruzaroad
Senior Member Joined: 02 Jul 2022 Location: Hastings 4 now Status: Offline Posts: 2284 |
Post Options
Thanks(0)
|
|||||||||||||||||||||||||||||||
What cal?
|
||||||||||||||||||||||||||||||||
Billbobnz
Senior Member Joined: 13 Jun 2020 Location: Ashburton Status: Offline Posts: 867 |
Post Options
Thanks(0)
|
|||||||||||||||||||||||||||||||
It's in .177
Threw on an old scope from a similar era and did 5 shots at 20m with a variety of pellets with results as below. I'm very impressed with the results for an older rifle and great consistency with those pellets. |
||||||||||||||||||||||||||||||||
Billbobnz
Senior Member Joined: 13 Jun 2020 Location: Ashburton Status: Offline Posts: 867 |
Post Options
Thanks(0)
|
|||||||||||||||||||||||||||||||
On and that paddock in the background, is where rabbits have been hiding out in the long grass, they got cows in to graze it down and I haven't seen a rabbit since.......!
|
||||||||||||||||||||||||||||||||
mercs
Senior Member Joined: 24 Apr 2020 Location: Stratford Status: Offline Posts: 272 |
Post Options
Thanks(0)
|
|||||||||||||||||||||||||||||||
Appreciate the effort and the pictures, nothing wrong with that performance, I tested a .177 after a full rebuild at 721 fps 8.5 ft/lb.
This .22 had a clean and new spring but with original rubber seal
|
||||||||||||||||||||||||||||||||
Billbobnz
Senior Member Joined: 13 Jun 2020 Location: Ashburton Status: Offline Posts: 867 |
Post Options
Thanks(0)
|
|||||||||||||||||||||||||||||||
Thanks for that and your notes, I've always wanted a Meteor and now I've got one it hasn't disappointed.
Will disassemble and rebuild at some stage. I had to scope it as I get blurry eyed with iron sights when I'm targeting |
||||||||||||||||||||||||||||||||
kruzaroad
Senior Member Joined: 02 Jul 2022 Location: Hastings 4 now Status: Offline Posts: 2284 |
Post Options
Thanks(0)
|
|||||||||||||||||||||||||||||||
The bsa meteor super I had when younger and they weren't an old rifle, was hell accurate.
At about 12 meters I took 15 pegs off mums cloths line before I missed, then took the rest out. Shot a white butter fly too. Three shots as it fluttered round the garden at about 15m. Last one took it down, but when I went to get it all 3 shots had hit. First 2 punched holes in its wing. Great guns. Will always be a favorite rifle for me. Mind you I had a trigger finger then too |
||||||||||||||||||||||||||||||||
Deano
Member Joined: 10 Jan 2024 Location: Tasman Status: Offline Posts: 21 |
Post Options
Thanks(0)
|
|||||||||||||||||||||||||||||||
Hi all, first post! I have dusted off my old Sharp Innova from the 80's and pulled it apart. I recall lending it to someone back in the day who thought firing steel darts and nails :( with it was a good idea! Needless to say the accuracy was no good after that.
After pulling it apart it was clear 30 year old O-rings needed replacing....the solution was to order a replacement breech and barrel from a Webley Rebel out of the UK, and an O-ring set. Also I discovered after a load of googling that if I polish the trigger parts it will make it a way better shooting gun... will find out soon! Was a great gun when I used it last, very light, powerful and accurate. Has a period Tasco 4x32AG.
Edited by Deano - 11 Jan 2024 at 2:54pm |
||||||||||||||||||||||||||||||||
kruzaroad
Senior Member Joined: 02 Jul 2022 Location: Hastings 4 now Status: Offline Posts: 2284 |
Post Options
Thanks(0)
|
|||||||||||||||||||||||||||||||
Great project.
They were the gun have at the time. I dreamed of getting one. Seemed the ultimate hunting rifle to me at time. Was getting great reviews in air gun mags. Definitely keep us updated on it all and how it shoots. Definitely feel a twinge of envy. Great project, I'll be watching with interest. |
||||||||||||||||||||||||||||||||
Deano
Member Joined: 10 Jan 2024 Location: Tasman Status: Offline Posts: 21 |
Post Options
Thanks(0)
|
|||||||||||||||||||||||||||||||
Yes I seem to recall it costing me $2xx or $3xx from Young's Airgun Centre... something like that. On a camping/hunting expedition in North West nelson I managed to destroy the original varnish on the stock from having the insect repellant "dimp" all over my face. That stuff is probably banned now LOL. The sandflies over that way are ferocious. So I sanded it all back and re finished it with Birchwood Caseys, came up nice.
Remember shooting several Hares and Possums spotlighting, that gun pumped 10x or more had a lot of stopping power in .22 The only issue really for me was the trigger - at high power it got super notchy and sort of grabbed a few times before release. Hence the sear polishing and attention in that area. I notice the webley replacement breech has a 2 stage springed setup which my original doesn't. Nice! The sear and sear lift have been given a thorough polish with 1500 and lightly greased, I have trial fitted it and it feels really great already but the test will be when it's under load from the release pin. If anyone's interested I can post pictures of this - I realise it's a bit of a relic but there's very little information on the web about this particular part of the gun, and improving it I'm pretty confident will make it much nicer to shoot at power and probably improve the accuracy a bit (it's already pretty decent!). |
||||||||||||||||||||||||||||||||
Pauly5
Forum Moderator Joined: 10 Mar 2013 Location: Titahi Bay Status: Offline Posts: 1415 |
Post Options
Thanks(0)
|
|||||||||||||||||||||||||||||||
yea, I'm sure we'd enjoy photos and progress with the refurbishment.
|
||||||||||||||||||||||||||||||||
Post Reply | Page <123> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |