Custom Butt Hook

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Right I just started on the Butt hooks for brett and myself.

I wanted to get some 25x25mm square bar but it was a bit expensive and you had to get it in 5meter lots so i decided to make it out of 30mm round after all i have a bit of this in the workshop anyway.

So first step is to mill the round bar square.

I decided to leave the forth corner for later as it would be easier to drill in the next step.

After the hole is drilled it is time to mill the top off.

Next mill the corners 

Next i use my belt sander to clean it up.

So this is what i am up to so far. It is tea time and i will do some more tonight.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
nunga Members Profile Send Private Message Find Members Posts Visit Members Homepage Add to Buddy List Forum Moderator Joined: 08 Mar 2013 Location: Pukekohe Status: Offline Posts: 1009	Post Options Post Reply Quote nunga Report Post Thanks(1) Quote Reply Topic: Custom Butt Hook Posted: 01 Jun 2014 at 5:20pm
	Right I just started on the Butt hooks for brett and myself. I wanted to get some 25x25mm square bar but it was a bit expensive and you had to get it in 5meter lots so i decided to make it out of 30mm round after all i have a bit of this in the workshop anyway. So first step is to mill the round bar square. I decided to leave the forth corner for later as it would be easier to drill in the next step. After the hole is drilled it is time to mill the top off. Next mill the corners Next i use my belt sander to clean it up. So this is what i am up to so far. It is tea time and i will do some more tonight.

(pink)MIST Members Profile Send Private Message Find Members Posts Visit Members Homepage Add to Buddy List Forum Moderator Joined: 09 Mar 2013 Location: Hamilton Status: Offline Posts: 465	Post Options Post Reply Quote (pink)MIST Report Post Thanks(0) Quote Reply Posted: 01 Jun 2014 at 6:14pm
	Ooooo flash new toy at work ;)
	NZAFTA President 1st place HP springer - 2014 WFTF Worlds 1st place HP springer - 2014 Nats AA TX200 MK111, Optisan Viper 8-32x60 JSB. VMach, TbT, maestro design.

MAGPIE Members Profile Send Private Message Find Members Posts Add to Buddy List Groupie Joined: 03 May 2013 Location: orewa Status: Offline Posts: 42	Post Options Post Reply Quote MAGPIE Report Post Thanks(0) Quote Reply Posted: 01 Jun 2014 at 7:12pm
	So far so good , will follow with interest

nunga Members Profile Send Private Message Find Members Posts Visit Members Homepage Add to Buddy List Forum Moderator Joined: 08 Mar 2013 Location: Pukekohe Status: Offline Posts: 1009	Post Options Post Reply Quote nunga Report Post Thanks(0) Quote Reply Posted: 01 Jun 2014 at 10:17pm
	Ok did some more to it. I kind of mucked up on the drawing i did so this first one will be for the TX and i will give the next one to brett and co. Anyway. Milled the sections out for the brackets to go. Next machine up the shaft so i can tilt the hook. As you can see this will give me the ability to tilt the hook left and right. I have got it sitting on the mounting plate blank which i will. mill slots into the end of the plate which will let me have further adjustments. I will then be able to adjust clock-wise and anti clock-wise as well Next i will mill slots to take the cap screws which will secure the brackets. So this is what it looks like so far. Time for a beer. Will do some more on it tomorrow.

(pink)MIST Members Profile Send Private Message Find Members Posts Visit Members Homepage Add to Buddy List Forum Moderator Joined: 09 Mar 2013 Location: Hamilton Status: Offline Posts: 465	Post Options Post Reply Quote (pink)MIST Report Post Thanks(0) Quote Reply Posted: 01 Jun 2014 at 10:32pm
	Looking good buddy, and taking shape reasonably fast to.
	NZAFTA President 1st place HP springer - 2014 WFTF Worlds 1st place HP springer - 2014 Nats AA TX200 MK111, Optisan Viper 8-32x60 JSB. VMach, TbT, maestro design.

nunga Members Profile Send Private Message Find Members Posts Visit Members Homepage Add to Buddy List Forum Moderator Joined: 08 Mar 2013 Location: Pukekohe Status: Offline Posts: 1009	Post Options Post Reply Quote nunga Report Post Thanks(0) Quote Reply Posted: 06 Jun 2014 at 12:19am
	Did some more work on it tonight, Coming along nicely now almost finished the first one. Some more pictures of the build for yous to look at. Made the mounting plate and made both the hooks as well So this is what it looks like now with all the parts laid out on the table, hopefully tomorrow night it will be all together on the TX.

(pink)MIST Members Profile Send Private Message Find Members Posts Visit Members Homepage Add to Buddy List Forum Moderator Joined: 09 Mar 2013 Location: Hamilton Status: Offline Posts: 465	Post Options Post Reply Quote (pink)MIST Report Post Thanks(0) Quote Reply Posted: 06 Jun 2014 at 7:36am
	Oooooo that's looking nice
	NZAFTA President 1st place HP springer - 2014 WFTF Worlds 1st place HP springer - 2014 Nats AA TX200 MK111, Optisan Viper 8-32x60 JSB. VMach, TbT, maestro design.

Davey Members Profile Send Private Message Find Members Posts Add to Buddy List Groupie Joined: 09 May 2014 Location: In the Office Status: Offline Posts: 80	Post Options Post Reply Quote Davey Report Post Thanks(0) Quote Reply Posted: 06 Jun 2014 at 9:28am
	Looks good man!

Davey Members Profile Send Private Message Find Members Posts Add to Buddy List Groupie Joined: 09 May 2014 Location: In the Office Status: Offline Posts: 80	Post Options Post Reply Quote Davey Report Post Thanks(0) Quote Reply Posted: 06 Jun 2014 at 2:40pm
	Just stick some old yoga mat to the contact faces, drill the sliding rail and you're away laughing! Also if you are able to set it up so that the heighing on the rail is easily adjustable you will find that useful for incline/decline shots. Edited by Davey - 06 Jun 2014 at 2:40pm

Pauly5 Members Profile Send Private Message Find Members Posts Add to Buddy List Forum Moderator Joined: 10 Mar 2013 Location: Titahi Bay Status: Offline Posts: 1410	Post Options Post Reply Quote Pauly5 Report Post Thanks(0) Quote Reply Posted: 06 Jun 2014 at 4:08pm
	Good work. Wish I had tools like that to play with.