Custom Butt Hook
Printed From: Kiwi Airgunners
Category: Technical
Forum Name: Pauly's Technical Area
Forum Description: Technical information, Modifications and DIY projects are all in here
URL: www.kiwiairgunners.co.nz/forum_posts.asp?TID=139
Printed Date: 23 Nov 2024 at 2:33pm
Software Version: Web Wiz Forums 10.14 - http://www.webwizforums.com
Topic: Custom Butt Hook
Posted By: nunga
Subject: Custom Butt Hook
Date Posted: 01 Jun 2014 at 5:20pm
|
Right I just started on the Butt hooks for brett and myself. I wanted to get some 25x25mm square bar but it was a bit expensive and you had to get it in 5meter lots so i decided to make it out of 30mm round after all i have a bit of this in the workshop anyway. So first step is to mill the round bar square.  I decided to leave the forth corner for later as it would be easier to drill in the next step.     After the hole is drilled it is time to mill the top off.  Next mill the corners  Next i use my belt sander to clean it up.  So this is what i am up to so far. It is tea time and i will do some more tonight.  |
Replies:
Posted By: (pink)MIST
Date Posted: 01 Jun 2014 at 6:14pm
|
Ooooo flash new toy at work ;) ------------- NZAFTA President 1st place HP springer - 2014 WFTF Worlds 1st place HP springer - 2014 Nats AA TX200 MK111, Optisan Viper 8-32x60 JSB. VMach, TbT, maestro design. |
Posted By: MAGPIE
Date Posted: 01 Jun 2014 at 7:12pm
| So far so good , will follow with interest |
Posted By: nunga
Date Posted: 01 Jun 2014 at 10:17pm
|
Ok did some more to it. I kind of mucked up on the drawing i did so this first one will be for the TX and i will give the next one to brett and co. Anyway. Milled the sections out for the brackets to go.  Next machine up the shaft so i can tilt the hook.  As you can see this will give me the ability to tilt the hook left and right. I have got it sitting on the mounting plate blank which i will. mill slots into the end of the plate which will let me have further adjustments. I will then be able to adjust clock-wise and anti clock-wise as well  Next i will mill slots to take the cap screws which will secure the brackets.   So this is what it looks like so far. Time for a beer. Will do some more on it tomorrow. |
Posted By: (pink)MIST
Date Posted: 01 Jun 2014 at 10:32pm
|
Looking good buddy, and taking shape reasonably fast to. ------------- NZAFTA President 1st place HP springer - 2014 WFTF Worlds 1st place HP springer - 2014 Nats AA TX200 MK111, Optisan Viper 8-32x60 JSB. VMach, TbT, maestro design. |
Posted By: nunga
Date Posted: 06 Jun 2014 at 12:19am
|
Did some more work on it tonight, Coming along nicely now almost finished the first one. Some more pictures of the build for yous to look at. Made the mounting plate and made both the hooks as well      So this is what it looks like now with all the parts laid out on the table, hopefully tomorrow night it will be all together on the TX. |
Posted By: (pink)MIST
Date Posted: 06 Jun 2014 at 7:36am
|
Oooooo that's looking nice ------------- NZAFTA President 1st place HP springer - 2014 WFTF Worlds 1st place HP springer - 2014 Nats AA TX200 MK111, Optisan Viper 8-32x60 JSB. VMach, TbT, maestro design. |
Posted By: Davey
Date Posted: 06 Jun 2014 at 9:28am
| Looks good man! |
Posted By: Davey
Date Posted: 06 Jun 2014 at 2:40pm
|
Just stick some old yoga mat to the contact faces, drill the sliding rail and you're away laughing! Also if you are able to set it up so that the heighing on the rail is easily adjustable you will find that useful for incline/decline shots.
|
Posted By: Pauly5
Date Posted: 06 Jun 2014 at 4:08pm
Good work. Wish I had tools like that to play with. ------------- |
Posted By: (pink)MIST
Date Posted: 06 Jun 2014 at 6:22pm
|
Tools/ toys all good fun, but sometimes there's nothing like using your hands :) I'm sure your missus would rather that than you using a mill on her lol :) It had to start sooner or later with a topic involving butt hooks :) ------------- NZAFTA President 1st place HP springer - 2014 WFTF Worlds 1st place HP springer - 2014 Nats AA TX200 MK111, Optisan Viper 8-32x60 JSB. VMach, TbT, maestro design. |
Posted By: Davey
Date Posted: 06 Jun 2014 at 7:07pm
| I'm surprised we got so far really. |
Posted By: nunga
Date Posted: 06 Jun 2014 at 9:59pm
|
hay this is a gun site not a porn site! :) ha ha ha ha |
Posted By: nunga
Date Posted: 06 Jun 2014 at 10:04pm
Right, all together now only a few more holes to drill and tap. Will install it on the TX tomorrow and see how it feels.  |
Posted By: nunga
Date Posted: 07 Jun 2014 at 9:47pm
|
Right done some more to it and i am happy with the way it looks now. I milled some slots and stretched some orings over.  Next I drilled and tapped the locking screw hole to lock everything in place.  I have made it so all the screws are facing the same way so you can bolt it to the stock and adjust everything without having to take it apart to tighten screws like some designs I have seen. You can adjust this clock wise, anti clock wise, tilt it left and right and move it up or down and you can move in and out.  |
Posted By: (pink)MIST
Date Posted: 07 Jun 2014 at 10:30pm
|
Want +1 Looks the part, does everything, nice upgrade for any rifle. Dead keen to have a try with it, but I think you've pretty much nailed what's needed to be done here in nz. It seems all these parts are ex uk at present, which really pushes the end price up, with all the mucking around as well. It's going to have such a good feel knowing that it's nz made to, not out worked to a factory in china. Very nice, you should be proud ------------- NZAFTA President 1st place HP springer - 2014 WFTF Worlds 1st place HP springer - 2014 Nats AA TX200 MK111, Optisan Viper 8-32x60 JSB. VMach, TbT, maestro design. |
Posted By: Pauly5
Date Posted: 08 Jun 2014 at 1:14am
|
Looks great. I agree, pretty pricey to buy something like this. Well done! ------------- |
Posted By: nunga
Date Posted: 08 Jun 2014 at 5:12pm
I have decided to replace the bottom jaw with a bar hook I had made my plans to have a bar hook at the bottom of it under the bottom jaw but when i was shooting it today i felt a little weird under my arm pit because of the width of the jaw. So i have come up with a new design. I started it this afternoon and will do some more on it later after tea. This bar will be made of alloy at this stage to test. Once i am happy with it i will make it out of Stainless steel. It doesnt look like much at the moment and you may not know how it will go together but you will see later on tonight obce i have finished it what it will look like and how it will work. |
Posted By: nunga
Date Posted: 08 Jun 2014 at 8:34pm
|
Ok finished the hook now. I must say i think i nailed this, feels so much better and the rifle is way more stable. You can adjust the hook very well with 3 points of adjustment just on the hook so you can get it to the exact spot that feels good for you. Here are some more pictures of the build. I can now start making them for resale and start on the 4 i have pre sold. If anyone is interested in there they will be $160.00 with the hook.    |
Posted By: (pink)MIST
Date Posted: 08 Jun 2014 at 10:00pm
|
I so know where one of these is going ! :) ------------- NZAFTA President 1st place HP springer - 2014 WFTF Worlds 1st place HP springer - 2014 Nats AA TX200 MK111, Optisan Viper 8-32x60 JSB. VMach, TbT, maestro design. |
Posted By: Pauly5
Date Posted: 08 Jun 2014 at 10:11pm
|
On your butt? ------------- |
Posted By: Davey
Date Posted: 09 Jun 2014 at 10:42am
|
Mean.Fun to see the mix of designs and ideas from Steyr, MEC, our own heads haha. I better order one to put on the FWB, although I'm not sure if I want to wings or a wing and a hook yet... and maybe one with 2 wings instead of a hook for my slavia... :) but I'll confirm that one later.
|
Posted By: nunga
Date Posted: 19 Jun 2014 at 12:09pm
|
Done some more work on the design over the last few nights, When i work out how to get the photos off my new "not so very" smart phone i will post some more details up :) |
Posted By: Davey
Date Posted: 19 Jun 2014 at 1:53pm
|
I just upload them to one of my cloud accounts generally (skydrive/onedrive seems to work the best) and then I'm good to go.... |
Posted By: (pink)MIST
Date Posted: 19 Jun 2014 at 3:09pm
|
I use photobucket, gives you all the different img codes for different applications , just copy/paste. ------------- NZAFTA President 1st place HP springer - 2014 WFTF Worlds 1st place HP springer - 2014 Nats AA TX200 MK111, Optisan Viper 8-32x60 JSB. VMach, TbT, maestro design. |
Posted By: nunga
Date Posted: 28 Jun 2014 at 3:43pm
|
Did some more work on it, re did the design a bit to make it more user friendly and a bit easier to make. Will post some photos tonight. |
Posted By: (pink)MIST
Date Posted: 28 Jun 2014 at 3:47pm
|
Yay, gun porn for tonight!! :) ------------- NZAFTA President 1st place HP springer - 2014 WFTF Worlds 1st place HP springer - 2014 Nats AA TX200 MK111, Optisan Viper 8-32x60 JSB. VMach, TbT, maestro design. |
Posted By: nunga
Date Posted: 28 Jun 2014 at 5:58pm
|
I decided to make this smaller and more bits. Each part will fit each other, You can pick and choose between parts that will suit your needs :) I decided to make the Jaws out of "T" section and mill it to suit. You may also notice my new collet chuck :)      |
Posted By: Davey
Date Posted: 30 Jun 2014 at 7:30am
|
All very nice!
Do you have a picture of an assembled one?
|
Posted By: nunga
Date Posted: 30 Jun 2014 at 9:59am
|
Will post it up tonight what the finished product looks like :) |
Posted By: nunga
Date Posted: 30 Jun 2014 at 9:20pm
 Thats what it looks like together. I will be putting a longer bar for it to rest on this will give you more room to adjust. |
Posted By: (pink)MIST
Date Posted: 30 Jun 2014 at 9:36pm
|
Very nice, I'm in ------------- NZAFTA President 1st place HP springer - 2014 WFTF Worlds 1st place HP springer - 2014 Nats AA TX200 MK111, Optisan Viper 8-32x60 JSB. VMach, TbT, maestro design. |
Posted By: nunga
Date Posted: 05 Jul 2014 at 2:06pm
This is it installed. Will test it tomorrow weather permitting  |
Posted By: nunga
Date Posted: 10 Jul 2014 at 9:03pm
|
Forgot to tell you all how it tested. It went very well and fitted nicely against the shoulder. the gun was nice and balanced. Just need to finish the jaws off with some rubber rings and it is done. |
Posted By: Pauly5
Date Posted: 10 Jul 2014 at 9:29pm
|
Nice work. Very satisfying. ------------- |
Posted By: nunga
Date Posted: 11 Jul 2014 at 9:44am
|
oh yea i also forgot to say my finished item will have 316 stainless steel hook and main bar, which i ordered some lengths of 10mm and 12mm on Monday and hopefully they will get here today. So i should be able to complete the orders i have on these by next weekend. |
Posted By: nunga
Date Posted: 07 Aug 2014 at 11:45pm
|
Well finally made the base plate to how i like it. I have also replaced the alloy bar with 315 stainless steel this is much harder and does not mark like the alloy did when you tightened up the screws. This new design is HEAPS better.    As you can see there is a lot more adjustment now and i have also re-done the top jaw with rubber inserts to stop it slipping. I will do the center plug tomorrow and have that looking good as well. I was selling these for $170 each. but this new design has a lot more parts and machining involved so i will be selling these for $220 each. People that have per-ordered from me will still get these at $170 but any new orders will be at the new price. |
Posted By: (pink)MIST
Date Posted: 08 Aug 2014 at 10:44am
|
That's looking quite nice now, and the price is still well under all the others, this will definitely level the playing field by allowing a more affordable, highly adjustable hook. Spread the word :) ------------- NZAFTA President 1st place HP springer - 2014 WFTF Worlds 1st place HP springer - 2014 Nats AA TX200 MK111, Optisan Viper 8-32x60 JSB. VMach, TbT, maestro design. |
Posted By: (pink)MIST
Date Posted: 19 Sep 2014 at 6:07pm
|
Did a handy little mod to my one, changed the Allen key for the up / down for a fitting that can be done by fingers :) Also (not in pic) have put marks for sit/kneel/stand, saving time on setup for each position :) http://s1291.photobucket.com/user/brettnixon/media/48BD1EAC-783E-4107-8D24-F088D5622DC3_zpsi6owkzdo.jpg.html" rel="nofollow">  ------------- NZAFTA President 1st place HP springer - 2014 WFTF Worlds 1st place HP springer - 2014 Nats AA TX200 MK111, Optisan Viper 8-32x60 JSB. VMach, TbT, maestro design. |
Posted By: Pauly5
Date Posted: 20 Jun 2015 at 11:22am
|
Can the hook be taken off for fitting the rifle into a case by loosening off the adjustment knob? you still doing these Nunga? ------------- |
Posted By: (pink)MIST
Date Posted: 20 Jun 2015 at 11:38am
|
Mine was a tight fit if I left it on, but 9/10 times I was removing it anyway. Very easy on and off so caused no issue ------------- NZAFTA President 1st place HP springer - 2014 WFTF Worlds 1st place HP springer - 2014 Nats AA TX200 MK111, Optisan Viper 8-32x60 JSB. VMach, TbT, maestro design. |
Posted By: nunga
Date Posted: 20 Jun 2015 at 4:54pm
Yes you can. very simple to do. I have mine off all the time. And yes i still make these. I have all the parts here and will take around a day to knock up. Cheers. ------------- 2nd place HP springer - WFTF World Championships 2014 |
Pauly5 wrote: