|
Down the rabbit hole |
Post Reply 
|
Page <1 6789> |
| Author | |
CuteRabbit 
Senior Member 
Joined: 17 Jan 2023 Location: Albany Auckland Status: Offline Posts: 120 |
 Post Options
 Thanks(0)
 Quote Reply
 Posted: 04 Feb 2023 at 5:15pm |
|
Thanks. Doing a lot adjustment and finally find out that the scope is leaning toward right becasue the srews on each mount side are not equally tightened... So the former sight-in work won't fix this problem totally. Re do it and will try flat nose and round nose tomorrow if not rainning.
Flat nose- guncity Round nose- Winchester (made in Spain so is good?)  Will try: rest-sandbag normoal standing an alternative pose of artillery hold (fold left arm, use the elbow to hold the gun, left hand grabing right wrist rather than use left hand to hold it)
Edited by CuteRabbit - 04 Feb 2023 at 5:17pm |
|
|
Squirrel goes Vege
@Crosman Benjamin Ironhide .22 Nitro Piston Elite @Umarex Surgemax .177 Gas Ram 1000fps |
|
 |
|
|
FPM
Groupie 
Joined: 31 Dec 2022 Location: New Zealand Status: Offline Posts: 56 |
Post Options
Thanks(0)
Quote Reply
Posted: 05 Feb 2023 at 1:28am |
|
I bought a new BSA scope recently which was factory fitted on its rail mount. But I thought I would check it with my Accutech level and sure enough it was off. I suggest you consider this if you don't already have one: https://www.guncity.com/accutech-reticle-level-kit-379898 I don't bother with a cleaning set. Just Rem Oil and paper towels. If your rifle has a factory fitted and fixed moderator like the Gamo and BSA, then bore cleaning is a risky proposition. Personally, I don't bother. Its not like there is combustion as in a powder rifle. I have a safe dehumidifier which I pull out every week or so and plug in overnight. Definitely an item worth having if your rifles are stored in an enclosed location like a safe (as they should be).
Edited by FPM - 05 Feb 2023 at 1:34am |
|
|
|
|
kruzaroad
Senior Member
Joined: 02 Jul 2022 Location: Hastings 4 now Status: Offline Posts: 2284 |
Post Options
Thanks(0)
Quote Reply
Posted: 05 Feb 2023 at 8:18am |
|
I use a string line with a heavy weight which I line the vertical cross hair up with, and a string line bubble level on the rifle on a flat machined face(usually one on top of rifle somewhere) for setting scope.
Have used the edge of builders level instead of string line. Though what you suggest is a way more practical solution, and can be used to make sure you arnt canting rifle when shooting. |
|
|
|
|
CuteRabbit
Senior Member
Joined: 17 Jan 2023 Location: Albany Auckland Status: Offline Posts: 120 |
Post Options
Thanks(0)
Quote Reply
Posted: 05 Feb 2023 at 3:10pm |
|
thanks,gonna visit guncity someday recently I think
|
|
|
Squirrel goes Vege
@Crosman Benjamin Ironhide .22 Nitro Piston Elite @Umarex Surgemax .177 Gas Ram 1000fps |
|
|
|
|
CuteRabbit
Senior Member
Joined: 17 Jan 2023 Location: Albany Auckland Status: Offline Posts: 120 |
Post Options
Thanks(0)
Quote Reply
Posted: 05 Feb 2023 at 3:19pm |
I think I didn't make it clearly, this pic is what i say
|
|
|
Squirrel goes Vege
@Crosman Benjamin Ironhide .22 Nitro Piston Elite @Umarex Surgemax .177 Gas Ram 1000fps |
|
|
|
|
CuteRabbit
Senior Member
Joined: 17 Jan 2023 Location: Albany Auckland Status: Offline Posts: 120 |
Post Options
Thanks(0)
Quote Reply
Posted: 05 Feb 2023 at 3:22pm |
I filled my sandbag with newspaper, which is too light... Also the table is too low that I can merely put my cheek on to the stock...
|
|
|
Squirrel goes Vege
@Crosman Benjamin Ironhide .22 Nitro Piston Elite @Umarex Surgemax .177 Gas Ram 1000fps |
|
|
|
|
CuteRabbit
Senior Member
Joined: 17 Jan 2023 Location: Albany Auckland Status: Offline Posts: 120 |
Post Options
Thanks(0)
Quote Reply
Posted: 05 Feb 2023 at 3:23pm |
elbow hold is stable but seems my neck is not long enough to put my cheek on stock easily...
|
|
|
Squirrel goes Vege
@Crosman Benjamin Ironhide .22 Nitro Piston Elite @Umarex Surgemax .177 Gas Ram 1000fps |
|
|
|
|
CuteRabbit
Senior Member
Joined: 17 Jan 2023 Location: Albany Auckland Status: Offline Posts: 120 |
Post Options
Thanks(0)
Quote Reply
Posted: 05 Feb 2023 at 3:24pm |
 All groups with flatnose
|
|
|
Squirrel goes Vege
@Crosman Benjamin Ironhide .22 Nitro Piston Elite @Umarex Surgemax .177 Gas Ram 1000fps |
|
|
|
|
CuteRabbit
Senior Member
Joined: 17 Jan 2023 Location: Albany Auckland Status: Offline Posts: 120 |
Post Options
Thanks(0)
Quote Reply
Posted: 05 Feb 2023 at 3:26pm |
6shots, 2flier
 |
|
|
Squirrel goes Vege
@Crosman Benjamin Ironhide .22 Nitro Piston Elite @Umarex Surgemax .177 Gas Ram 1000fps |
|
|
|
|
CuteRabbit
Senior Member
Joined: 17 Jan 2023 Location: Albany Auckland Status: Offline Posts: 120 |
Post Options
Thanks(0)
Quote Reply
Posted: 05 Feb 2023 at 3:44pm |
|
By the way, tried a brand new surgemax. I am happy with my second hand one becasue the new one seems 1.5times harder to cock and louder... and the maybe because it is cheap, the safe is very very tight on the new surgemax. Cannot open it with hand, and we finally use a lever to open it... this is really not reasonable design. After about 5 shots, the new surgemax's safe is lighter and can be shifted by hand but still very very tight...and my second hand one is just as smooth as a normal safe
Wondering will the new one be more powerful? donnot have good materials to test power for now, so just guest for the louder sound and harder to cock. Edited by CuteRabbit - 05 Feb 2023 at 3:47pm |
|
|
Squirrel goes Vege
@Crosman Benjamin Ironhide .22 Nitro Piston Elite @Umarex Surgemax .177 Gas Ram 1000fps |
|
|
|
|
Post Reply
|
Page <1 6789> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options