milling machine

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   jeppers man sounds like you having tough time,because my age n work injuries my health hasnt been that good for many years,i just learnt how deal with it n get on with life eh!!,hope you dont get menijitus
 bud that definatly not lot fun.
 I spent too much on tooling n machinery over past couple years i reckon,should just bought more guns
 eh!!you know wots like tho with machinery n tools if you love wot you can make with them,there allways
 something else you want or think you mite someday n wen turns up cheap or on special etc,you know 
 how that ends,bit like guns,you can never have toooo many evan if you never use em.
 Just decided would get the best tooling etc i could afford at time n over the years it sorta became a 
 project in its self,my wife would tell you its an obsession i am sure.
 But tis nice to be able to machine pretty much anything i can fit on or in my machines,wen comes to 
 gun projectsi can make most things these days,my lathe n mill aint anything special,just chinese stuff
 tho was carefully chosen to suit my needs n puposes and its proven to do just that,so am quite happy
 with wot i have now,i guess in the end its not so much the tools that do the job eh!! but the man using  
 the tools that does the busseness.
 Over the years i have seen some unbelievably well made guns built using some very bassic hand tools
 by very patient men,but have allso seemn lot dangerous crap made by clever guys who should known
 better too n bet you seen both as well.
 I only had very bassic training as a general engineering apprentice bac in early 1070s,the rest i learnt
 on the job by making mistakes n learning from them,i am bassiaclly mainly self taught as machinist
 I consider myself a competent machist,not an expert by any means.
 tho been repairing,modifying and at times building various types guns for allmost 40 years now,i am
 not a gunsmith either having no training as one both maching and working on guns are just my 
 hobby,tho its been a hobby for long time.
 I dont consider myself an expert on anything,but over time you can get quite good at doing things
 you totally enjoy,but there allways something new to learn.
 cheers mike

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
dvlnme Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 30 May 2017 Location: taranaki Status: Offline Posts: 519	Post Options Post Reply Quote dvlnme Report Post Thanks(0) Quote Reply Topic: milling machine Posted: 22 May 2018 at 7:16pm
	jeppers man sounds like you having tough time,because my age n work injuries my health hasnt been that good for many years,i just learnt how deal with it n get on with life eh!!,hope you dont get menijitus bud that definatly not lot fun. I spent too much on tooling n machinery over past couple years i reckon,should just bought more guns eh!!you know wots like tho with machinery n tools if you love wot you can make with them,there allways something else you want or think you mite someday n wen turns up cheap or on special etc,you know how that ends,bit like guns,you can never have toooo many evan if you never use em. Just decided would get the best tooling etc i could afford at time n over the years it sorta became a project in its self,my wife would tell you its an obsession i am sure. But tis nice to be able to machine pretty much anything i can fit on or in my machines,wen comes to gun projectsi can make most things these days,my lathe n mill aint anything special,just chinese stuff tho was carefully chosen to suit my needs n puposes and its proven to do just that,so am quite happy with wot i have now,i guess in the end its not so much the tools that do the job eh!! but the man using the tools that does the busseness. Over the years i have seen some unbelievably well made guns built using some very bassic hand tools by very patient men,but have allso seemn lot dangerous crap made by clever guys who should known better too n bet you seen both as well. I only had very bassic training as a general engineering apprentice bac in early 1070s,the rest i learnt on the job by making mistakes n learning from them,i am bassiaclly mainly self taught as machinist I consider myself a competent machist,not an expert by any means. tho been repairing,modifying and at times building various types guns for allmost 40 years now,i am not a gunsmith either having no training as one both maching and working on guns are just my hobby,tho its been a hobby for long time. I dont consider myself an expert on anything,but over time you can get quite good at doing things you totally enjoy,but there allways something new to learn. cheers mike

nunga Members Profile Send Private Message Find Members Posts Visit Members Homepage Add to Buddy List Forum Moderator Joined: 08 Mar 2013 Location: Pukekohe Status: Offline Posts: 1009	Post Options Post Reply Quote nunga Report Post Thanks(0) Quote Reply Posted: 22 May 2018 at 8:50am
	You have been out shopping i see. Got some nice toys by the sounds of it. My run of bad luck continues with me been off work again within the first week of getting back. This time i caught some virus and was in bed a few days then it turnned nasty and i woke up in hospital hooked up to all these fun machines. They were testing me for meningitis and i can tell you that was not a nice feeling waiting for results of that. Thankfully that came back negative and im back at home now but still in bed but on the mend! Need to get out soon as i have a couple of guns here that need fixing. Edited by nunga - 22 May 2018 at 8:52am
	2nd place HP springer - WFTF World Championships 2014

dvlnme Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 30 May 2017 Location: taranaki Status: Offline Posts: 519	Post Options Post Reply Quote dvlnme Report Post Thanks(0) Quote Reply Posted: 16 May 2018 at 9:43am
	bit tough bout the leg mate,hope getting better,just bought 3x axis set sino dros etc,cost $660 time got here,but worth it,bloody awesume setup,only issuse being too damned accurate in readouts due to going out to 10 thuo in,1000 mil etc,got ignore last 2 didgits on readout,otherwise very pleased with them,proberly got more features than i will ever need,as got all the cnc programable features etc, bit rediculous i guess putting this type setup on my machine but sure improves the measuring scales thats for sure,got no excuses for getting measurements out now. was it worth the cost??? possibly not to someone else,but to me,i am happy with wot i got for the money n i guess thats all that really matters. allso just purchased full set er25 x2mt arboured collets for mill,a er25x 3mt collet chuck for lathe, another er32x 3mt collet chuckn extra collets that continue from 16mm the er25 collets stop,up to 26 mm for the lathe,as going make a 5mt spindle arbour for headstock to suit 3mt er collet chucks it give me the capablity use the collets at both ends the lathe,allso got a new live center with small 65mm 3 jaw chuck thats demounable,this will now give me a small 3 jaw chuck can allso use on the rotary table,been spending bit on tooling lately,n still have 50mm boreing head n bars set on order n still to arrive,got stop wanting more tooling once this arrives,as will then have all the tooling etc i i need for lathe n mill ,have lost track wot been spent on lathe n milling tooling now,but gota be a lot more than i think eh!! cheers mike

nunga Members Profile Send Private Message Find Members Posts Visit Members Homepage Add to Buddy List Forum Moderator Joined: 08 Mar 2013 Location: Pukekohe Status: Offline Posts: 1009	Post Options Post Reply Quote nunga Report Post Thanks(0) Quote Reply Posted: 10 May 2018 at 9:44pm
	ha ha yep :)
	2nd place HP springer - WFTF World Championships 2014

MAGPIE Members Profile Send Private Message Find Members Posts Add to Buddy List Groupie Joined: 03 May 2013 Location: orewa Status: Offline Posts: 42	Post Options Post Reply Quote MAGPIE Report Post Thanks(0) Quote Reply Posted: 06 May 2018 at 9:22pm
	So is it too soon to give nunga a new Nick name ... stumpy ?? Edited by MAGPIE - 06 May 2018 at 9:22pm

xyon Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 20 Dec 2016 Location: Canterbury Status: Offline Posts: 135	Post Options Post Reply Quote xyon Report Post Thanks(0) Quote Reply Posted: 01 May 2018 at 8:23pm
	Bummer, sorry to hear about you accident. But at least you got some more time for airgun related activities.
	--- My favourites springer - Diana 52 PCP - FX Wildcat III

nunga Members Profile Send Private Message Find Members Posts Visit Members Homepage Add to Buddy List Forum Moderator Joined: 08 Mar 2013 Location: Pukekohe Status: Offline Posts: 1009	Post Options Post Reply Quote nunga Report Post Thanks(0) Quote Reply Posted: 01 May 2018 at 3:27pm
	I am quite surprised they lasted as long as they did. mine packed up in no time. a total waste of money in my books. Having said that i got my mill out of storage and its setup in the shed now. I noticed the gears sound very bad when its running so ill look into that this week as i am off work for the rest of the week due to a run in with a tree that took offense to been cut down and it stabbed me in the leg then broke off inside my leg....so it was off to hospital for surgery and lots of stitches...so needless to say ive got a little time on my hands now ha.
	2nd place HP springer - WFTF World Championships 2014

dvlnme Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 30 May 2017 Location: taranaki Status: Offline Posts: 519	Post Options Post Reply Quote dvlnme Report Post Thanks(0) Quote Reply Posted: 22 Apr 2018 at 8:11am
	said would let you kno nunga on how the cheap dro units worked out,one spat dummy few days ago now readout jumping around all over the place n wont hold zero etc,traced it back to batterys moving in out contact due to vibrations etc and eventually only getting intermitant contact etc,the other one still seems ok tho,but unfortunatly i broke the plug off being clumsy, so now dead. cant get replacement so going to slash out n buy good set heavy duty 240 system as as soon can afford to,so prob guna have sell something to doso. want fit set to lathe too now,prob guna cost 1200 to do both machines tho,so been trying sell my 22cal pcp pistol on nz forum,so far no interest tho,bit surprised bout lack interest considering pcp pistols seem to be basically banned imports due to our friends in nz police bassically making up the rules to suit themselves eh!!!!anyway pistol still for sale,open to realistic offers,pics n info on nz forum,this is a damned good n serious hunting pistol no lic required either. cheers mike

dvlnme Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 30 May 2017 Location: taranaki Status: Offline Posts: 519	Post Options Post Reply Quote dvlnme Report Post Thanks(0) Quote Reply Posted: 04 Oct 2017 at 4:23pm
	just got some cheap hafco battery powered ones from mac house to bud,had no issuses as yet,they got be very solidly mounted and covered to protect the electronics from oil,cutting fluid etc otherwise they all play up mate,i shrinkwrapped the sender units as well as completly covered the magnetic strips. Have seen evan very expenisive industral units play up if not protected,i guess just the luck the draw mate. I would sent em back to mac house,they garrenteed for a year and should replaced them for you. I been dealing mac house for lot years,never had any issuses with them replacing faulty gear. Didnt want spend much on the machine fitted mine to as is just a Toolshed $800 budget mill/drill i purchased for good drill press and really only wanted to see if could upgrade it a bit and see how it worked out as a small mill eh!! as i have got metric n imperial drawbar type collets,arbours etc for boring head,face mills etc that fit its 2mt spindle. Wasnt expecting too much from the cheap DROs etc,but so far they seem be holding up well,will let you kno how they hold up,but cant really see why they shouldnt,as really no diff to a long digital vernier when all said n done eh!! Cheers Mike

nunga Members Profile Send Private Message Find Members Posts Visit Members Homepage Add to Buddy List Forum Moderator Joined: 08 Mar 2013 Location: Pukekohe Status: Offline Posts: 1009	Post Options Post Reply Quote nunga Report Post Thanks(0) Quote Reply Posted: 30 Sep 2017 at 12:14pm
	I converted my mill with the digital scales some time ago. mine were the cheaper ones from machinery house. they were battery operated as well as dc power via an adapter to the mains outlet. they went okay for about half a day then started to jump around and not hold zero. they quickly ended up in the bin. what a waste of money those were. what brand name and model are yours? wouldnt mind getting a set that actually work!
	2nd place HP springer - WFTF World Championships 2014