Flub's General Discussion - Crosman 2250 question time

Print Page | Close Window

Crosman 2250 question time

Printed From: Kiwi Airgunners
Category: General
Forum Name: Flub's General Discussion
Forum Description: General discussion goes in here.
URL: www.kiwiairgunners.co.nz/forum_posts.asp?TID=965
Printed Date: 23 Nov 2024 at 3:13pm
Software Version: Web Wiz Forums 10.14 - http://www.webwizforums.com

Topic: Crosman 2250 question time

Posted By: Ozzy
Subject: Crosman 2250 question time
Date Posted: 28 Jan 2024 at 12:40pm

First question fellas,

Where is the best place to order 2250 parts from? I'm looking for a powerlet seal and probably others and maybe a 18inch barrel? Youngs? Or any overseas options that are cost effective enough. Cheers

Replies:

Posted By: Ozzy
Date Posted: 28 Jan 2024 at 1:01pm

Also a safety assembly, mine including spring, ball bearing and safety bar is missing.

Posted By: mercs
Date Posted: 28 Jan 2024 at 3:43pm

Recent order from Youngs and Ron had everything I needed for an overhaul. Not sure about an 18 inch barrel and whether it will add to performance on CO2.

Posted By: Billbobnz
Date Posted: 28 Jan 2024 at 9:32pm

Young's should have everything you need. Do you have a steel breach on it? I would recommend going steel if you haven't already especially with going to 18" barrel

Posted By: kruzaroad
Date Posted: 29 Jan 2024 at 7:35am

Youngs has only ever done stock after market parts made by crossman when I've tried to get things off them.
Claims as a crossman supplier he can't order non crossman parts.
Heres a list of places I was given who deal with aftermarket crossman stuff.

A couple of popular supliers are:

gmaccustomparts.com

alliancehobby.com

alchemyairwerks.com

magnumairpower.com

mellonair.myfreesites.net - good price for extended / flow through probes & power adjusters

https://www.airgun-parts-shop.co.uk/

Posted By: Declan
Date Posted: 29 Jan 2024 at 8:10am

Personally I’d be a bit cautious about ordering from the USA as their postal service is known to return to sender any item suspected or identified as being a gun/airgun part shipped to NZ.

Posted By: Pauly5
Date Posted: 29 Jan 2024 at 11:48am

Small ball bearings can be ordered from NZ. I got 20 as there's a force that ejects them into the outer realm whenever you look at them. Not sure about springs, but they could be made if you had thin enough spring wire.

I have punched O rings out of butynol and had success for the powerlet seal. Could also use slivers of silicone tube.

They may not last as long as original seals, but cheap and readily available.

Steel breech a good upgrade too.