Home made pull thru
Printed From: Kiwi Airgunners
Category: Technical
Forum Name: Pauly's Technical Area
Forum Description: Technical information, Modifications and DIY projects are all in here
URL: www.kiwiairgunners.co.nz/forum_posts.asp?TID=936
Printed Date: 14 May 2024 at 8:06am
Software Version: Web Wiz Forums 10.14 - http://www.webwizforums.com
Topic: Home made pull thru
Posted By: Tentman
Subject: Home made pull thru
Date Posted: 20 Nov 2023 at 8:38pm
|
Gidday Guys I'd like to make a pcp style pull through .. . . So I need some tube that is small enough (5mm or less for my guns) and stiff enough to get down the bore from the muzzle. I've been to my usual local industrial supply places and Supercheap but can't find the "right" stuff. Any ideas out there? |
Replies:
Posted By: Pauly5
Date Posted: 21 Nov 2023 at 7:51am
|
I use nylon coated stainless wire, or even weed trimmer line with the end melted into a mushroom to hold patch Can use a straw to guide it through silencer, then push it down to breech, load a patch and pull it back. Otherwise look at the kit they have at gun shops for rigid rod type cleaners.
|
Posted By: KiwiTR6
Date Posted: 21 Nov 2023 at 10:05am
|
I made mine up out of some 60lb fishing nylon folded in half and fed up through a scrap piece of nylon pressure tube with a piece of wooden dowel for a handle. Works a treat!    ------------- FX Wildcat MK111 BT Sniper .25 Walther Reign M2 .22 Evanix AR6 .22 FX Dreamline Classic .22 Cometa Fenix 400 .177 Weihrauch HW50 .177 Air Chief Junior .177 ($100 Challenge) |