milling parts
Printed From: Kiwi Airgunners
Category: For Sale / Wanted
Forum Name: Wanted
Forum Description: Are wanting to buy something? try in here first
URL: www.kiwiairgunners.co.nz/forum_posts.asp?TID=883
Printed Date: 04 Apr 2025 at 3:16pm
Software Version: Web Wiz Forums 10.14 - http://www.webwizforums.com
Topic: milling parts
Posted By: Pauly5
Subject: milling parts
Date Posted: 03 Sep 2023 at 3:08am
|
I am looking for a couple of parts, so thought I would see if anyone had them by chance. I'm after either a Morse taper 3 to B16 chuck adapter, or ER32 collet 3, 4 and 5 mm Thanks
|
Replies:
Posted By: nunga
Date Posted: 03 Sep 2023 at 5:14am
|
https://www.machineryhouse.co.nz/c903" rel="nofollow - https://www.machineryhouse.co.nz/c903 https://www.machineryhouse.co.nz/c904" rel="nofollow - https://www.machineryhouse.co.nz/c904 https://www.machineryhouse.co.nz/c905" rel="nofollow - https://www.machineryhouse.co.nz/c905 Not sure about the chuck adapter but they do sell them too. I do have one here but im using it :) ------------- 2nd place HP springer - WFTF World Championships 2014 |
Posted By: Pauly5
Date Posted: 03 Sep 2023 at 6:55am
|
Thanks Nunga. I've just entered the world of milling and the collet set I got stops at 6 mm, and I need a 3 & 4 mm. I also thought my chuck would fit but it has a MT2 on it. A whole new world of part names and codes that I never understood until I actuially have them and need them. |
Posted By: Pauly5
Date Posted: 03 Sep 2023 at 7:10am
|
Nunga, another question. If I used a MT3 to MT2 adapter sleeve for a chuck, do I need to use the draw bar for the adapter? |
Posted By: jusepy82
Date Posted: 03 Sep 2023 at 7:24am
|
Are you able to mill parts for "customers" ? Got a part for my b-3 I'm requiring a skilled fellow like you to make. ------------- As long as there is lead in the air...there is hope. |
Posted By: Pauly5
Date Posted: 03 Sep 2023 at 7:33am
I've messaged you. |
jusepy82 wrote:Posted By: Stuart
Date Posted: 03 Sep 2023 at 11:44am
| Get fc3 milling cutters fit in 6mm collet or either turn up 6mm silver steel with hole you require and put a saw slot down the length of it and put it in 6mm collet only need to be about 8-10 mm long. |
Posted By: kruzaroad
Date Posted: 03 Sep 2023 at 12:47pm
|
This is great. Just the type of thing that gets my interest. Awsome |
Posted By: Stuart
Date Posted: 03 Sep 2023 at 12:55pm
|
Needs to be a thin saw blade for 3mm. You can get fc3 cutters in many sizes also long series ones. |
Posted By: Pauly5
Date Posted: 03 Sep 2023 at 12:57pm
|
Ok, thanks. That's a good idea. So FC3 all have the same size shank, a good way around it too. I still need to get myself a MT3 to MT2 sleeve or MT3 to B16 adapter so I can use my chuck and not need to buy a new one |
Posted By: Stuart
Date Posted: 03 Sep 2023 at 1:05pm
| https://tradetools.co.nz/shop/milling/hss-hss-cobalt/fc3-cutters--plain-shank-cobalt-milling |
Posted By: nunga
Date Posted: 04 Sep 2023 at 5:09am
No, I dont think so mate ------------- 2nd place HP springer - WFTF World Championships 2014 |