Print Page | Close Window

Trigger upgrade done at last...

Printed From: Kiwi Airgunners
Category: General
Forum Name: Flub's General Discussion
Forum Description: General discussion goes in here.
URL: www.kiwiairgunners.co.nz/forum_posts.asp?TID=83
Printed Date: 23 Nov 2024 at 3:16pm
Software Version: Web Wiz Forums 10.14 - http://www.webwizforums.com


Topic: Trigger upgrade done at last...
Posted By: poorshot
Subject: Trigger upgrade done at last...
Date Posted: 04 Dec 2013 at 4:43pm

G4 trigger upgrade in today.

I was amazed when I took the gun to bits what a basic bit of kit it is in terms of engineering etc!
While I had it in parts I pulled the gas ram out and cleaned and lubed everything.

At the rear of the ram just in front of where it sits in the trigger housing the piston had made some pretty bad scratches and wear on the ram body.

Tolerances throughout seem pretty slack.
That said I have fired a few thousand rounds trouble free so far.

I guess what amazes me is it is so basic and works so well.

The trigger upgrade is great but I am one of the rare few that ended up with a hair trigger so if I don't like it I will pull it down again and work it through, as per the instructions for such an outcome.

I did a bit of sanding here and there so will see what it looks like next time I pull it down I guess.

Already way more accurate though.

Great trigger!



-------------
It's all fun and games and then somebody looses an eye.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 10.14 - http://www.webwizforums.com
Copyright ©2001-2012 Web Wiz Ltd. - http://www.webwiz.co.uk