Webley and Scott .25 rebuild with gas piston
Printed From: Kiwi Airgunners
Category: General
Forum Name: Flub's General Discussion
Forum Description: General discussion goes in here.
URL: www.kiwiairgunners.co.nz/forum_posts.asp?TID=737
Printed Date: 23 Nov 2024 at 2:43pm
Software Version: Web Wiz Forums 10.14 - http://www.webwizforums.com
Topic: Webley and Scott .25 rebuild with gas piston
Posted By: Billbobnz
Subject: Webley and Scott .25 rebuild with gas piston
Date Posted: 27 Jan 2023 at 12:49pm
Well finally I have this little machined part from the guy down the road. Will see if I can get this gun back together this weekend. 
|
Replies:
Posted By: kruzaroad
Date Posted: 27 Jan 2023 at 2:33pm
|
What is it?? Looks massive for an air rifle |
Posted By: Billbobnz
Date Posted: 27 Jan 2023 at 2:53pm
| It is the rear receiver for the gas piston to sit in above the trigger assembly. |
Posted By: kruzaroad
Date Posted: 27 Jan 2023 at 3:01pm
|
Probly would have helped if I swiped the pic to left and saw the rest. Doh. So is that same as original or have you redisigned it a bit. Not really a part I would have thought would flog out. What metal you use for new one. |
Posted By: Billbobnz
Date Posted: 27 Jan 2023 at 3:22pm
|
Here it is with the original. The piston needed to be resessed into the end peice to allow it to be cocked. The piston is about 5mm too long. The original is a cast part and I didn't want to modify that as buy milling alot of material out it may have failed very fast. Just did a test fit and it needs .5 of a mm taken off in 1 area and it should all be perfect.  
|
Posted By: Billbobnz
Date Posted: 27 Jan 2023 at 3:25pm
|
New part is 6061-t6 aluminum I think it's made from. |
Posted By: kruzaroad
Date Posted: 27 Jan 2023 at 3:33pm
|
https://asm.matweb.com/search/SpecificMaterial.asp?bassnum=ma6061t6 Properties of 6061-t6 aluminum. Looks like a good choice for sure. |
Posted By: CuteRabbit
Date Posted: 28 Jan 2023 at 2:00am
Wonder if it is possible to buy a steel pipe and some bearing ball and a gas-struct on car to 3d print an air rifle so that we can gain an air rifle at somewhere no air rifle sold such as China? ------------- Squirrel goes Vege @Crosman Benjamin Ironhide .22 Nitro Piston Elite @Umarex Surgemax .177 Gas Ram 1000fps |
Posted By: Billbobnz
Date Posted: 28 Jan 2023 at 9:50am
|
Gas struct on cars are usually got a system that regulates the force for a smooth operation or works at a lower pressure than gas rams. You can get seamless steam pipe off AliExpress and rifling buttons for forming barrels but you will need a press to push the rifling button through. |
Posted By: kruzaroad
Date Posted: 28 Jan 2023 at 10:26am
Don't encourage him, sounds like he wants to start a underground Chinese illegal air rifle ring 
|
Posted By: Pauly5
Date Posted: 28 Jan 2023 at 11:49am
| Nice work. Loving watching all these mods happening. |
Posted By: Billbobnz
Date Posted: 28 Jan 2023 at 2:22pm
| Next build is for a Beeman sportsman rs2, I've got everything to build it except for a barrel (these were one of the models that came with both .177 and .22 barrels) using a barrel off a umarex Ruger rifle I've got for parts. |
Posted By: CuteRabbit
Date Posted: 28 Jan 2023 at 4:34pm
|
so umarex and ruger are same manufactor with different brands? ------------- Squirrel goes Vege @Crosman Benjamin Ironhide .22 Nitro Piston Elite @Umarex Surgemax .177 Gas Ram 1000fps |