CR600W - Mediocre power after common mods

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic


    Lol Pauly, I think we should all be adopting / dialing minute of rabbit. Many a slug / pellet wasted chasing the 6mm hole at 100yds!

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
jwabfrog Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 13 Nov 2021 Location: Thames Status: Offline Posts: 152	Post Options Post Reply Quote jwabfrog Report Post Thanks(1) Quote Reply Posted: 23 Jan 2025 at 9:38am
	Lol Pauly, I think we should all be adopting / dialing minute of rabbit. Many a slug / pellet wasted chasing the 6mm hole at 100yds!

Mintie Members Profile Send Private Message Find Members Posts Add to Buddy List Member Joined: 18 Feb 2017 Location: Hawkes Bay Status: Offline Posts: 48	Post Options Post Reply Quote Mintie Report Post Thanks(0) Quote Reply Posted: 29 Jan 2025 at 3:26pm
	Sounds like you were on the right track for good power, just to check though when you opened up the TP hole you also matched the valve, breech and barrel to the same diameter? Pauly is on the right track to bring up pellet weight too, my testing at 18 fpe was always with heavy pellets and warm weather. The .25 cal one I built for Zooboy ended up about 22fpe from memory. Dropping the power back if necessary is just a matter of less HST or a lighter hammer, doesn't matter if the valve is still hogged out for max volume.