|
Crosman hollow probe build |
Post Reply 
|
Page <12345> |
| Author | |
RangerPete 
Senior Member 
Joined: 18 Apr 2023 Location: Cambridge. Status: Offline Posts: 884 |
 Post Options
 Thanks(0)
 Quote Reply
 Posted: 13 May 2023 at 2:27pm |
👍🏻👍🏻👍🏻 would be interesting to do some simple tests and see if it works, once you have a working prototype 👍🏻 |
|
|
Walk quietly, but carry a big stick.
|
|
 |
|
|
Pauly5
Forum Moderator 
Joined: 10 Mar 2013 Location: Titahi Bay Status: Offline Posts: 1410 |
Post Options
Thanks(0)
Quote Reply
Posted: 13 May 2023 at 8:51pm |
|
It's been a good day in the workshop. Today I took the 362 apart to work on the valve area,
Drilled out TP in the barrel to 4 mm drilled out TP to 4 mm shaped the outlet valve in the valve body I started to slim the valve stem and broke it, so I ended up making a new one. I didn't thin out this stem, but round off the edges of the valve stem body for better flow around it, but only minimal difference. I also made a delrin spring seat which would increase the hammer spring tension. This sits inside the hammer. Photos to follow, and chrony results you will want to see at the end.   Spring ends on the hammer spring are horrific, so they got smoothed off.  New valve stem next to the broken factory one. Now I know I can successfully make them I might try slimming out the stem for better flow.  Delrin seat for hammer tension increase.  A couple of angles of the valve body. Trying to show the smoothed out angle for better air flow.   So what were the results? Prior to this work I had already fitted a hollow probe: Using 18 grn JSB 8 pumps I was getting 13.80 fpe. 12 pumps 16.11 fpe After the above works using 18 grn JSB 8 pumps - 15.71 fpe - 624 fps 10 pumps - 17.61 fpe - 661 fps I'm pretty impressed with that. I packed it in for the night, but will see if all the air has been dumped and will try 12 pumps tomorrow. Then accuracy needs to be tested.   |
|
|
|
|
kruzaroad
Senior Member
Joined: 02 Jul 2022 Location: Hastings 4 now Status: Offline Posts: 2283 |
Post Options
Thanks(0)
Quote Reply
Posted: 13 May 2023 at 9:01pm |
|
Dude that's a nice jump up in fpe.
You must happy with the alterations. Great review throughly enjoying it Awsome detail photos. |
|
|
|
|
Pauly5
Forum Moderator
Joined: 10 Mar 2013 Location: Titahi Bay Status: Offline Posts: 1410 |
Post Options
Thanks(0)
Quote Reply
Posted: 13 May 2023 at 9:24pm |
|
Glad you like it, It's been really enjoyable doing it.
I've been making drawings with measurements so I can make more bits later without having to take it apart and measure things again. It also helps me figure out the order of operations.
|
|
|
|
|
RangerPete
Senior Member
Joined: 18 Apr 2023 Location: Cambridge. Status: Offline Posts: 884 |
Post Options
Thanks(0)
Quote Reply
Posted: 13 May 2023 at 9:48pm |
|
Very interesting thread.
And you are lucky to have the machinery, and the knowledge, to be able to tinker and create 😉 Have you tried a few damaged skirts on that beveled probe yet? I’ll bet it works a treat! 😉 |
|
|
Walk quietly, but carry a big stick.
|
|
|
|
|
Billbobnz
Senior Member
Joined: 13 Jun 2020 Location: Ashburton Status: Offline Posts: 867 |
Post Options
Thanks(0)
Quote Reply
Posted: 13 May 2023 at 10:02pm |
|
That... Is awesome. Fantastic results.
|
|
|
|
|
Pauly5
Forum Moderator
Joined: 10 Mar 2013 Location: Titahi Bay Status: Offline Posts: 1410 |
Post Options
Thanks(0)
Quote Reply
Posted: 13 May 2023 at 10:26pm |
I will have a go at that next. I know the probe seats the pellet well as there are clear rifling marks on the skirt after pushing the bolt home.  |
|
|
|
|
Pauly5
Forum Moderator
Joined: 10 Mar 2013 Location: Titahi Bay Status: Offline Posts: 1410 |
Post Options
Thanks(0)
Quote Reply
Posted: 15 May 2023 at 7:46am |
|
Quick update.
12 pumps = 19.16 fpe / 690 fps Bent pellet skirt testing to come.
|
|
|
|
|
Myson
Senior Member
Joined: 06 Mar 2016 Location: Feilding Status: Offline Posts: 182 |
Post Options
Thanks(0)
Quote Reply
Posted: 15 May 2023 at 8:02am |
|
Paul - you're an engineering genius!!!
I wish I had your skills!
 |
|
|
https://www.youtube.com/watch?v=eq7jVyBfFqE
Air Arms S510 US .22 Air Arms S410 .22 Weihrauch HW97KT .177 Weihrauch HW95 .177 |
|
|
|
|
jwabfrog
Senior Member
Joined: 12 Nov 2021 Location: Thames Status: Offline Posts: 142 |
Post Options
Thanks(0)
Quote Reply
Posted: 15 May 2023 at 8:44am |
|
Seriously impressive results, well done
|
|
|
|
|
Post Reply
|
Page <12345> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
Pauly5 wrote: