Still Learning

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Shooting at range the other day, me with my FX wildcat, other guy with his entry level Gamo PSP. He kicked my ass for accuracy. Him being an English person, we had a discussion about clean barrels and his opinion was never clean your barrel & never use oil based chemicals when you do,  can take 700 shots to break in a barrel. Ok I have cleaned my barrel 2x using heavy fishing string and cloth pull threw and hoppies No 9 but  dry patched it out. 

Next came cleaning & lubricating pellets silicone lub, weight & skirt sorting, these are must do & individually storing pellets in knock proof seperated containers.
 WOW I really am a Bogan
To be fair I was messing around with different pellets & weights & power settings, The wildcat is limited in adjustment ability but still enough to get carried away playing with settings. 
This English guy is happy with less speed, and while sighted in at 25m has a drop of about 4 inches at 50m but better accuracy than I achieved.    Still Learning

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
flock Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 27 Jan 2022 Location: Christchurch Status: Offline Posts: 93	Post Options Post Reply Quote flock Report Post Thanks(0) Quote Reply Topic: Still Learning Posted: 06 Apr 2023 at 10:21pm
	Shooting at range the other day, me with my FX wildcat, other guy with his entry level Gamo PSP. He kicked my ass for accuracy. Him being an English person, we had a discussion about clean barrels and his opinion was never clean your barrel & never use oil based chemicals when you do, can take 700 shots to break in a barrel. Ok I have cleaned my barrel 2x using heavy fishing string and cloth pull threw and hoppies No 9 but dry patched it out. Next came cleaning & lubricating pellets silicone lub, weight & skirt sorting, these are must do & individually storing pellets in knock proof seperated containers. WOW I really am a Bogan To be fair I was messing around with different pellets & weights & power settings, The wildcat is limited in adjustment ability but still enough to get carried away playing with settings. This English guy is happy with less speed, and while sighted in at 25m has a drop of about 4 inches at 50m but better accuracy than I achieved. Still Learning

Myson Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 06 Mar 2016 Location: Feilding Status: Offline Posts: 182	Post Options Post Reply Quote Myson Report Post Thanks(0) Quote Reply Posted: 07 Apr 2023 at 6:22am
	If you were trying different pellets, did you "re-lead" your barrel with the next pellet type before comparing groups? For example: Shoot a group with pellet "A" Re-Lead your barrel with 7 of pellet "B" (fire them into the ground) Shoot a group with pellet "B" and compare with "A" group And so on... I find that if I don't re-lead first, I don't get true groups for comparison. Perhaps this is why your accuracy on that day was less than usual?
	https://www.youtube.com/watch?v=eq7jVyBfFqE Air Arms S510 US .22 Air Arms S410 .22 Weihrauch HW97KT .177 Weihrauch HW95 .177

kruzaroad Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 02 Jul 2022 Location: Hastings 4 now Status: Online Posts: 2226	Post Options Post Reply Quote kruzaroad Report Post Thanks(0) Quote Reply Posted: 07 Apr 2023 at 9:02am
	I'd agree with the releading between differmt pellets. I've come to the conclusion that the differnt hardness of the lead of certain pellets needs to either A: clear the build up of lead from softer pellets or pellets that have a smaller head size or B: build up the layer if harder or larger diameter pellets habe been used. I've found that if I shoot 2 groups of 5 that first group will usually throw around three flyers and don't take the first group seriously but will compare any of the none flyer shots with the second group. This is without cleaning the barrel. After cleaning the barrel I usually run 15 or so soft lead pellets ( gun City Javelin or white pellets usually) through it then 5 of what I'm shooting then back to the two groups of 5 then adjustment. I also keep all my wrong head size and damaged skirt pellets of the pellets Im using for hunting for the initial shots after using the softer pellets. Then the actual correct head size and weight for the two groups of 5. This is just from what I've found personally. I'd be keen to hear what others do or don't do.

Pauly5 Members Profile Send Private Message Find Members Posts Add to Buddy List Forum Moderator Joined: 10 Mar 2013 Location: Titahi Bay Status: Offline Posts: 1394	Post Options Post Reply Quote Pauly5 Report Post Thanks(0) Quote Reply Posted: 07 Apr 2023 at 9:35am
	If you have a Mk3 wildcat, you will be able to tighten groups by fine adjustments of the hammer tension. This can change the harmonics of the whole shot cycle and can tighten groups. Most FX will perform well with JSB, AA pellets. I don't clean my barrel unless accuracy starts to get bad. Do you have a chrony? It's a bit like photography where you can take photos whatever the setting, but getting the balance with F stop, exposure, shutter speed will give you a great photo. Regulator pressure, valve spring tension and hammer tension are the three main things for a pcp. You want just the right amount of air, not too much or too little to push the pellet out, and then you get that sweet pffft. Edited by Pauly5 - 07 Apr 2023 at 9:36am

flock Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 27 Jan 2022 Location: Christchurch Status: Offline Posts: 93	Post Options Post Reply Quote flock Report Post Thanks(0) Quote Reply Posted: 07 Apr 2023 at 1:03pm
	Thanks Guys think you are right, keep changing pellets too often. Trying to achieve 900 with 25g slugs on highest setting 7 / 920 with 18g jsbs setting 6 / 900 with 16g hades setting 5 and so on, so was switching all over the place. Noticed after doing the wash, dry, silicone of half tin of Hades, there were a lot that had kinks in the skirt, so below is a boat tail 223 projectile jammed into a case backwards, makes an excellent tool for sorting this out.

flock Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 27 Jan 2022 Location: Christchurch Status: Offline Posts: 93	Post Options Post Reply Quote flock Report Post Thanks(0) Quote Reply Posted: 07 Apr 2023 at 1:05pm


kruzaroad Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 02 Jul 2022 Location: Hastings 4 now Status: Online Posts: 2226	Post Options Post Reply Quote kruzaroad Report Post Thanks(0) Quote Reply Posted: 07 Apr 2023 at 1:08pm
	Sweet. I'll have to give that a go. Great tip cheers.

flock Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 27 Jan 2022 Location: Christchurch Status: Offline Posts: 93	Post Options Post Reply Quote flock Report Post Thanks(0) Quote Reply Posted: 07 Apr 2023 at 1:54pm
	projectile was 8og V max. Discovered the 130g speer hollow point in 308 is possibly even better.

FPM Members Profile Send Private Message Find Members Posts Add to Buddy List Groupie Joined: 31 Dec 2022 Location: New Zealand Status: Offline Posts: 56	Post Options Post Reply Quote FPM Report Post Thanks(0) Quote Reply Posted: 07 Apr 2023 at 5:48pm
	I take the other approach. I either hit or don't hit. I don't bother trying to get sub inch groupings. I shoot both 22cal pellets and 22lr. I have found both are a bit variable. For example my 22lr has a 5 round mag. I can shoot 4 rounds in a row and hit every time, then pretty much guaranteed the 5th round needs a slightly different aim point or it misses. One day I might get fanatical but for now am moving towards hunting. Edited by FPM - 07 Apr 2023 at 5:50pm

mercs Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 24 Apr 2020 Location: Stratford Status: Offline Posts: 262	Post Options Post Reply Quote mercs Report Post Thanks(0) Quote Reply Posted: 07 Apr 2023 at 7:18pm
	Still Learning - great title for a post - this one should never end. Barrel clean possibly justified when new or experiencing undefined issues, I use thousands of pellets through a barrel without cleaning. For airguns I was strongly advised not to by a gunsmith and that was good enough for me. If people feel they must clean barrels then seek advice and never use anything abrasive. Pellets, quick visual examination prior to loading should be sufficient for 25 yard 1/2 inch group. Several manufacturers have premium or "match lines" which should improve quality. Purchase JSB Exact Diablo pellets to reduce concerns about pellets. Purchase AirArms Diablo Field pellets and eliminate concerns. Pellet clean, wash, lube, size and weigh all must make a difference but I expect a good visual will pick up most "flyers". I am sure if I had a flash PCP rifle then I would want to experiment with the controls however to prove or gain accuracy it may be best to select low or mid power and master that first otherwise there are too many variables. Amazing what the UK shooters accomplish with sub 12 ft/lb. When you decide on pellet and especially head size, grab them when available amazing how long between shipments these days. Not to sure about notched pellets if accuracy is the goal, great chance for someone do some further comparisons. cheers storage tray a great idea after all that effort. Edited by mercs - 07 Apr 2023 at 8:08pm