Sig Sauer ASP20

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Excellent tests mercs!
I'm waiting for my pellet headsize checker to arrive from UK before I continue testing the SIG because I'm convinced my SIG is very headsize fussy?

I want to try each headsize from a new tin of H&N's Baracuda Match 4.50 (4.46mm - 4.53mm) to see if there's one headsize that consistently gives tightest groups.

My gut feel is that those headsizes below 4.50mm will be better than those above...? We'll see....

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Myson Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 06 Mar 2016 Location: Feilding Status: Offline Posts: 182	Post Options Post Reply Quote Myson Report Post Thanks(0) Quote Reply Posted: 16 Jan 2023 at 7:13am
	Excellent tests mercs! I'm waiting for my pellet headsize checker to arrive from UK before I continue testing the SIG because I'm convinced my SIG is very headsize fussy? I want to try each headsize from a new tin of H&N's Baracuda Match 4.50 (4.46mm - 4.53mm) to see if there's one headsize that consistently gives tightest groups. My gut feel is that those headsizes below 4.50mm will be better than those above...? We'll see....
	https://www.youtube.com/watch?v=eq7jVyBfFqE Air Arms S510 US .22 Air Arms S410 .22 Weihrauch HW97KT .177 Weihrauch HW95 .177

kruzaroad Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 02 Jul 2022 Location: Hastings 4 now Status: Offline Posts: 2283	Post Options Post Reply Quote kruzaroad Report Post Thanks(0) Quote Reply Posted: 16 Jan 2023 at 10:05am
	I'd put money on 4.53mm not shooting well at all. 4.52mm being tad erratic. I found the 4.50mm and 4.49mm grouping best and holding target in AA. I'd be keen to see your results. There seems to be a lot of mention of baracuda, and I be interested in results. Great review mercs, I'll try get one up on AA and exact just getting ready to shift at moment so not as much time as id Like. Still got enough room for shooting targets where I'm off too.

Myson Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 06 Mar 2016 Location: Feilding Status: Offline Posts: 182	Post Options Post Reply Quote Myson Report Post Thanks(0) Quote Reply Posted: 16 Jan 2023 at 11:28am
	Thanks Kruza. Interesting.... we'll see what headsize is best for my barrel. The reason I'm thinking one headsize will be best is that I'm getting fliers in some of my current groups with the "4.50" tin and I reckon those fliers are most probably due to unsuitable headsizes in the tin? I've weighed the pellets into three weight groups (Lite, Medium and Heavy) and I get fliers in all three weight groups so it's probably not a difference of weight - more like a difference in headsize that's causing the odd flier or two. The good thing is that if I ignore the fliers, the groups are great with H&N Baracuda Match 4.50's. If I can find the right headsize (that does not produce fliers), I think I'm looking at 30mm 7-shot groups at 50yds consistently. Sweet! Can't wait for my pellet headsize checker to arrive!
	https://www.youtube.com/watch?v=eq7jVyBfFqE Air Arms S510 US .22 Air Arms S410 .22 Weihrauch HW97KT .177 Weihrauch HW95 .177

kruzaroad Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 02 Jul 2022 Location: Hastings 4 now Status: Offline Posts: 2283	Post Options Post Reply Quote kruzaroad Report Post Thanks(0) Quote Reply Posted: 16 Jan 2023 at 11:49am
	Weight will play part. There is a relationship between the extreme weight ranges and head size. I've found. Flyers should cut right down. It also gives you time to check for head and skirt damage. Skirt damage can be a big thing in some tins. Actual roundness of the head is interesting too. I found a few pellets that measured differnt on one side to the other. The worst was 4.50mm one side and 4.46mm on the other. I imagine that would affect flight chararistics as well. Skirt damage is a biggie with me I'm pretty hard on my judgement of it, it takes very little to lift the skirt to high for effective seal.

mercs Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 24 Apr 2020 Location: Stratford Status: Offline Posts: 272	Post Options Post Reply Quote mercs Report Post Thanks(0) Quote Reply Posted: 16 Jan 2023 at 8:57pm
	30 metres warm calm Taranaki evening. Previously zeroed to this distance. I had been pleased with JSB's so thought I would put them up against a pellet I use regularly. By the numbers the JSB has an edge. I think that I have reached my technical limit with this particular rifle. The Sig has a good kick so not sure if I can manage it any better. 20mm O.D. Sig ASP20 .22 JSB Match Diablo Jumbo Express 0.93 grammes 14.35 grains 5.52mm 21mm O.D. Sig ASP20 .22 RWS Super Field 1.03 grammes 15.9 grains 5.51mm

kruzaroad Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 02 Jul 2022 Location: Hastings 4 now Status: Offline Posts: 2283	Post Options Post Reply Quote kruzaroad Report Post Thanks(0) Quote Reply Posted: 16 Jan 2023 at 9:14pm
	Poppy cock! If your at your technical limit, then it's time to start fine tuning. ( Though from a hunting aspect, those are both killer groups.) A spring change to something that will lessens the kick and by default fpe. Maybe a small tweek in your hold? Its really so close hole on hole it would be a shame not to find a way tighten it.

kruzaroad Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 02 Jul 2022 Location: Hastings 4 now Status: Offline Posts: 2283	Post Options Post Reply Quote kruzaroad Report Post Thanks(0) Quote Reply Posted: 17 Jan 2023 at 6:12pm
	So here's the sig after 3 days in its padded hardcase not being used. Doesn't say much for the anti corrosion on this particular gun. Oh well off hunting, it's been cleaned and reoiled

Billbobnz Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 13 Jun 2020 Location: Ashburton Status: Offline Posts: 867	Post Options Post Reply Quote Billbobnz Report Post Thanks(0) Quote Reply Posted: 17 Jan 2023 at 7:41pm
	Are you serious...!! Wowzers looks like it's had a bath in sea water before being stored...!

mercs Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 24 Apr 2020 Location: Stratford Status: Offline Posts: 272	Post Options Post Reply Quote mercs Report Post Thanks(0) Quote Reply Posted: 17 Jan 2023 at 9:28pm
	Thanks for that, takes the term "patina" a bit far, damn I wonder if there has been a chemical reaction involved. Amazed it comes through after being oiled, that will need taking back to clean steel and and a full treatment or painting. Rushed to gun safe to check and mine do not have that dreadful disease. Will consider quarantine as a precaution.

kruzaroad Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 02 Jul 2022 Location: Hastings 4 now Status: Offline Posts: 2283	Post Options Post Reply Quote kruzaroad Report Post Thanks(0) Quote Reply Posted: 17 Jan 2023 at 10:35pm
	Gad think we had enough of quarantines. It could well be the sweat from hands, but that was wiped and oiled before going away. The 1322 which sits in the same place, except with just a towel wrapped around it is sweet as. That thing use to surface rust like mad till it had been oiled a dozen plus times. I've got a packet of moisture absorbing crystals in the sig hard case too. Guess I'll just keep oiling it Hooe it stops. Maybe I should write to sig, might be able to get a new barrel in .22. I wish.