Leather seals for Telly Relum

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I was doing a rat job at a house this week, and came across an old Telly Rellum in the ceiling. I gave the lady $20 and she was happy for me to take it. So I though I will give it a little tickle up.It was running hot at 2.7 fpe (.177)

Things wrong with it,
Surface rust, stuffed piston seal, missing a stock screw and the barrel was bent.

I didn't realize the barrel was bent until I got it home, but oh well, I will give it a crack and it is only destined for plinking cans anyway, so long as the pellet comes out straight, i'm happy.

I rubbed it down with WD40 and a bit of 3M pad, and was surprised how well that worked. I'm in the process of reblueing it with some cold reblue I have. It won't be perfect, but I will learn.

For the seal, I turned up a male and female press mould for shaping the leather. Pictures show the old seal in two bits, but I'm pleased how the new one turned out. What oil should I soak it in? I have read petroleum for low powered airguns. I have motor oil, or 3 in 1? Any suggestions?

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Pauly5 Members Profile Send Private Message Find Members Posts Add to Buddy List Forum Moderator Joined: 10 Mar 2013 Location: Titahi Bay Status: Offline Posts: 1410	Post Options Post Reply Quote Pauly5 Report Post Thanks(0) Quote Reply Topic: Leather seals for Telly Relum Posted: 11 May 2020 at 9:51pm
	I was doing a rat job at a house this week, and came across an old Telly Rellum in the ceiling. I gave the lady $20 and she was happy for me to take it. So I though I will give it a little tickle up. It was running hot at 2.7 fpe (.177) Things wrong with it, Surface rust, stuffed piston seal, missing a stock screw and the barrel was bent. I didn't realize the barrel was bent until I got it home, but oh well, I will give it a crack and it is only destined for plinking cans anyway, so long as the pellet comes out straight, i'm happy. I rubbed it down with WD40 and a bit of 3M pad, and was surprised how well that worked. I'm in the process of reblueing it with some cold reblue I have. It won't be perfect, but I will learn. For the seal, I turned up a male and female press mould for shaping the leather. Pictures show the old seal in two bits, but I'm pleased how the new one turned out. What oil should I soak it in? I have read petroleum for low powered airguns. I have motor oil, or 3 in 1? Any suggestions?

Pauly5 Members Profile Send Private Message Find Members Posts Add to Buddy List Forum Moderator Joined: 10 Mar 2013 Location: Titahi Bay Status: Offline Posts: 1410	Post Options Post Reply Quote Pauly5 Report Post Thanks(0) Quote Reply Posted: 11 May 2020 at 9:53pm
	Here's the mould with the formed leather seal sitting in it.

J-S Members Profile Send Private Message Find Members Posts Visit Members Homepage Add to Buddy List Senior Member Joined: 19 Oct 2014 Location: Auckland Status: Offline Posts: 425	Post Options Post Reply Quote J-S Report Post Thanks(0) Quote Reply Posted: 12 May 2020 at 2:11pm
	nice! Good to see another oldie get a new life.
	J S Airguns Air Arms TX200('s) Theoben Sirocco HW77 FWB 300s Webley Patriot One or two others... Current projects: Too many..

dvlnme Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 30 May 2017 Location: taranaki Status: Offline Posts: 519	Post Options Post Reply Quote dvlnme Report Post Thanks(0) Quote Reply Posted: 12 May 2020 at 6:20pm
	3 n 1 oil mate,you can get leather washers from water pump suppliers that you maybe lucky and find some that will work,they easy nuf to make with a simple cake cutter type die made from approprate sized pipe with steel punch made to fit using vice for a press mate,good find tho hope works out . cheers mike