For sale BSA Lonestar

I'm selling my BSA lonestar, 177, single shot pcp.
It has a regulator fitted and is currently running at around 20 fpe.
It has some cosmetic damage to the stock. I have modified the cheek piece by adding an adjustable cheek riser and installed sling studs.

I will add more photos but here's a couple. This would be a good hunting gun. Nice trigger.
Its not beautifully polished or in showroom quality condition so loves getting in amongst it. Light and plenty of power.
Was my first pcp.
The courier snapped the stock at the grip when I first got it , but it has been epoxy fixed with a dowel running through the grip. So a solid repair, but I never got around to removing the excess epoxy because it would have made a more visual impact.

Pm me if you're interested.

That's a real bargain. Pity I don't have a licence or I'd buy it

I will chuck in a Nunga beanie of your choice to whoever buys it.

So this is designed as a hunting gun in that it is really set up for high power. The power can be adjusted either up or down from where it's at. Shot count is around 27 or 30 from a fill. It's very easy to work on if you have to pull it apart. It has the micro cocking mechanism which is located at the front of the stock. This means you can load your pellet without cocking, then when you're ready you just cock and fire. Quite practical for carrying around safely. The barrel is free floating with a threaded end. You will need a silencer as it has quite a bark to it. I had a mighty mouse silencer on it that worked really well. These are not expensive. I put the cheek riser on it because with a scope mounted I found the cheek rest too low. This can be removed if you like, and there will be two threaded inserts left in the butt, so it won't look bad.

I haven't used it for a while and it may need a change of o rings for around the regulator. I will try and get a new set anyway as they are only a few cents each.

Will try and load new photos later.

Edited by Pauly5 - 20 May 2017 at 9:52am

Here's a photo of when I had it set up and using it.