.25 CO2 beast

Just want to say a big thanks to jwabfrog for sending me the .25 barrel.

I will be starting my new project over the weekend. This will be a 30PFE .25 CO2 bolt action rifle Powered by a standard Sodastream 60L bottle. This will take a while as everything will be made by me (apart form the barrel) I have been planing and researching this for the last year and i am finally ready to start.

So watch this space!

So ive been super busy lately but i managed to get into the garage today to make a start on this project.

I have done the research but now i will test this research to make sue i am on the right track before i even start making the parts for the gun.

So i am making an adapter to screw onto the end of the Sodastream bottle. It will have a thread on both ends. One to fit the Sodastream bottle and the other to have a threaded rod that will screw into the valve of the bottle to open it. Then i will tap a thread in the side to install a pressure gauge to make sure the bottle will give me the 800PSI needed for these calculations to get the 30PFE target output.

  

I will drill and tap the rest tomorrow with a bit of luck and test.