|
Optical zero? |
Post Reply 
|
| Author | |
kruzaroad 
Senior Member 
Joined: 03 Jul 2022 Location: Hastings 4 now Status: Offline Posts: 2527 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: Optical zero?Posted: Yesterday at 12:25pm |
|
So I've been aware for a while of the technique of tin foil over scope lens with a small hole, set zoom lowest,ao lowest,get target as close as possible within foucus and fire a shot then measure from bulls to shot for scope height.
Supposed to give more accurate measurements in chair gun. So finally going to try it. The one thing i cant find on any video is wether I need to be set to optical zero, or if i can do it sighted in. Can anyone help me on this please. Cheers |
|
 |
|
|
RangerPete
Senior Member
Joined: 19 Apr 2023 Location: Cambridge. Status: Offline Posts: 1011 |
Post Options
Thanks(0)
Quote Reply
Posted: Yesterday at 3:51pm |
|
Hi Kruza, what is it that you are trying to work out, the scope height?
|
|
|
Walk quietly, but carry a big stick.
|
|
|
|
|
kruzaroad
Senior Member
Joined: 03 Jul 2022 Location: Hastings 4 now Status: Offline Posts: 2527 |
Post Options
Thanks(0)
Quote Reply
Posted: Yesterday at 4:15pm |
|
Hi Pete.
Yep but Im trying this way to see if it's more accurate than the half scope height and center of bore. |
|
|
|
|
Billbobnz
Senior Member
Joined: 14 Jun 2020 Location: Ashburton Status: Offline Posts: 914 |
Post Options
Thanks(0)
Quote Reply
Posted: Yesterday at 7:48pm |
|
This may be helpful
https://airgunforums.co.uk/threads/chairgun-tutorial.26534/ I will try and find that video of the tinfoil method |
|
|
|
|
Billbobnz
Senior Member
Joined: 14 Jun 2020 Location: Ashburton Status: Offline Posts: 914 |
Post Options
Thanks(0)
Quote Reply
Posted: Yesterday at 7:53pm |
|
This is in the above which I thought was interesting.
|
|
|
|
|
nunga
Admin 
Joined: 09 Mar 2013 Location: Pukekohe Status: Offline Posts: 1069 |
Post Options
Thanks(0)
Quote Reply
Posted: 21 hours 22 minutes ago at 10:38pm |
|
Not sure how that method will give a more accurate measurement because you are limited to a number of factors. first off you have to make sure cross hairs in the scope are bang on center and that is floored because the cross hairs move up and down inside the scope which will give you a false height unless you are sure that is also dead center. Then you have to work out the center of the pellet hole in the paper target you have just shot. Too many things can go wrong. I have always done it the following way. Outside diameter of the barrel % by 2 (if the scope is long enough) or measure the outside diameter of the breach and divide that by two. and then the outside diameter of the scope and % by 2. Add the gap between the scope and the barrel plus the two other numbers and you cant go wrong. i use my Mitutoyo vernier calipers for this. To me this is a better method because the scope is fixed to the gun and that will not change
|
|
|
2nd place HP springer - WFTF World Championships 2014
|
|
|
|
|
kruzaroad
Senior Member
Joined: 03 Jul 2022 Location: Hastings 4 now Status: Offline Posts: 2527 |
Post Options
Thanks(0)
Quote Reply
Posted: 12 hours 37 minutes ago at 7:23am |
|
The scope is mounted to the rifle this way too!
The rifle fore end can be held in hand and bag rested , and the wrist and trigger hand steadied by a towel or such. Distance is about 6m and im going to do it in the shipping container for no wind. The bag and towel technique is incredibly steady and my standard set up for distance sighting. I had a yak with chat gpt and it gave me the equation to work out scope height from my rifle as set to 50m. Here it requirements is for anyone interested. Pin hole in tinfoil in mm X= muzzle to target in meters Zero distance (optional) Average shots If have wedges in. Scope model I have the equation but can't do the division equation set up on this ph, so if anyone wants it let me know and i photo it. Personally I'll just use chat gpt to do it. Honestly I'll be checking how close it is to my more traditionally measured scope height first. I'm experimenting Nunga. Seeing if something different works better. Im doubtful as it doesn't seem to require a lot of info but its all angles and maths and if there is one thing chat gpt beats us all at is mathematical logic. Time will tell ( i will too after it) |
|
|
|
|
kruzaroad
Senior Member
Joined: 03 Jul 2022 Location: Hastings 4 now Status: Offline Posts: 2527 |
Post Options
Thanks(0)
Quote Reply
Posted: 7 hours 41 minutes ago at 12:19pm |
|
Well that was crap.
Gave it wealth of info and it came back with 17.1mm Though it did have some good info internal scope measurements. Wants the thickness of the barrel so can work out height now. So much for angle calculations. 15mm high at 6.26m |
|
|
|
|
nunga
Admin
Joined: 09 Mar 2013 Location: Pukekohe Status: Offline Posts: 1069 |
Post Options
Thanks(0)
Quote Reply
Posted: 3 hours 31 minutes ago at 4:29pm |
|
One thing to take into account as well is that the pellet does not travel out of your barrel in a straight line. If your zero is set for say 30 meters and you put your tin foil over the lens and move the target as close as possible your pellet will be hitting very low. Which will give you wrong data to work off.
|
|
|
2nd place HP springer - WFTF World Championships 2014
|
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options