Used .22 Barrel or Damaged Rifle WTB

Hi Pete.

I've tried all the pellet types I have on hand under 18gr and it's petty much the same issue with all of them.  Several accurate with outliers interspersed.

I may do a minor mod to the existing barrel before I try something else and see if that helps at all.  I have also been given some Sig Sauer Daggers to try.

I've built a 2250 based PCP pistol for target shooting but the pellets are are too easy to push through with a rod (in my opinion) and it doesn't shoot as accurately as my 2240 PCP pistol which utilizes a cut down 2250 barrel. I suspect the loose fit is the cause of the inaccuracy after having dialed in the operating pressure and hammer spring tension.  It's shooting at 550fps, exactly the same as the other gun and producing 9fpe with 13gr JSBs, but doesn't group as well even though it's a longer barrel.

I'd like to try something else but now have the new 2260 barrel as a backup.  Regardless, I'll do a pellet push through test on anything I get before I start cutting and machining.

Thanks Kruza.  I've been in touch with Ron already, he only had .177 available secondhand but I did buy a new 2260 barrel from him which I can cut down if I don't manage to find something else.

A Cometa would be ideal, but probably not that common.