Silicone RC shock oil for pellet lube? |
Post Reply | Page <12 |
Author | |
Pauly5
Forum Moderator Joined: 10 Mar 2013 Location: Titahi Bay Status: Offline Posts: 1409 |
Post Options
Thanks(0)
|
Yes HPA is high pressure air.
If you get the wrong luibe or oil into a pcp tank, you couild have the tank explode, as the air pressure with cause it to ignite just like the air pressure causes the oil to explode in a springer. This is why pcp o rings use lubes like divers silicone. |
|
RangerPete
Senior Member Joined: 18 Apr 2023 Location: Cambridge. Status: Offline Posts: 884 |
Post Options
Thanks(0)
|
Or, try it in the $100 Airchief green mamba first!
|
|
Walk quietly, but carry a big stick.
|
|
RangerPete
Senior Member Joined: 18 Apr 2023 Location: Cambridge. Status: Offline Posts: 884 |
Post Options
Thanks(0)
|
Whats a HPA? High Pressure Airgun?
So how do you tell is something is going to diesel under pressure? Put a small drop on the sidewalk and hit it with a hammer?
|
|
Walk quietly, but carry a big stick.
|
|
Pauly5
Forum Moderator Joined: 10 Mar 2013 Location: Titahi Bay Status: Offline Posts: 1409 |
Post Options
Thanks(0)
|
You don't want anything that will diesel in a HPA situation!!! If it gets into the air tank, you have a potential bomb.
The closest I get is a smear of Moly on external touching parts.
|
|
kruzaroad
Senior Member Joined: 02 Jul 2022 Location: Hastings 4 now Status: Offline Posts: 2282 |
Post Options
Thanks(0)
|
Look for petrolium products in them.
|
|
RangerPete
Senior Member Joined: 18 Apr 2023 Location: Cambridge. Status: Offline Posts: 884 |
Post Options
Thanks(0)
|
So the questions that pop into my head are things like:
1 - how can you test if something is going to diesel, before you put it into your gun...? Squirt out a few drops and try light it? if its combustable of flammable it should catch alight, right? 2 - Whats the best way to evenly and consistently apply 1 drop of lube to 100 pellets? I'm going to try a tiny little plastic "zip lock bag" just big enough for 100 pellets. Going to put the drop into the bag first, then rub the two sides of the bag together, to get the lube spread over as much of the sides of the bag as possible. Then drop in the pellets, get them all in a single layer so both sides of the bag will be touching each pellet, and give them a gentle roll around. Will use JSB exacts for the tests, but will also try some of the .177 slugs I just got from Spyda.
|
|
Walk quietly, but carry a big stick.
|
|
RangerPete
Senior Member Joined: 18 Apr 2023 Location: Cambridge. Status: Offline Posts: 884 |
Post Options
Thanks(0)
|
|
|
Walk quietly, but carry a big stick.
|
|
RangerPete
Senior Member Joined: 18 Apr 2023 Location: Cambridge. Status: Offline Posts: 884 |
Post Options
Thanks(0)
|
Hi Guys,
I remember a thread somewhere discussing pellet lubes, but I cant find it now... Any way, I have just acquired some "TLR shock oil" from a Radio Controlled shop in Hamilton. I saw something on a FB group about someone using it as a pellet lube and thought I'd give it a go. There were different weights/viscosity's from 20 up to 45, so I got the thinnest one, which is 20. I also intend trying some bicycle chain lube which is a liquid wax that dries into a waxy layer. Obviously it will be as thin or as thick as you apply it. For both of the above I intend using 5 drops per 500 pellets, or 1 drop/100 pellets. So much testing to do... so little time!
|
|
Walk quietly, but carry a big stick.
|
|
Post Reply | Page <12 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |