Webbly and Scott .25 rebuild

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   if you find out the ram is too long for the gun after you cut it down i do have one of my gas rams here for the hatsan left over when i converted my mod125 over to gas ram, you will need to cut it down from memory, just remember when cutting the ram down that you make sure you cut it 3mm shorter then it needs to be to avoid bottoming out the ram and damaging it.   

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
nunga Members Profile Send Private Message Find Members Posts Visit Members Homepage Add to Buddy List Admin Joined: 09 Mar 2013 Location: Pukekohe Status: Offline Posts: 1050	Post Options Post Reply Quote nunga Report Post Thanks(0) Quote Reply Posted: 19 Dec 2022 at 3:34pm
	if you find out the ram is too long for the gun after you cut it down i do have one of my gas rams here for the hatsan left over when i converted my mod125 over to gas ram, you will need to cut it down from memory, just remember when cutting the ram down that you make sure you cut it 3mm shorter then it needs to be to avoid bottoming out the ram and damaging it.
	2nd place HP springer - WFTF World Championships 2014

Billbobnz Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 14 Jun 2020 Location: Ashburton Status: Offline Posts: 882	Post Options Post Reply Quote Billbobnz Report Post Thanks(0) Quote Reply Posted: 19 Dec 2022 at 11:50am
	Rainy horrible day forcing me to stay indoors. Made some progress on my Webbly .25 cal spring to gas ram conversion. Has had all it's seals replaced from customer air seals and I also got the gas ram for it from them too. First problem is the ram is too long for the gun... And the rear section of the ram needs to be set back 15mm into the rear section of the cast end cap for it to work. Spent some time down at the old guy down the road and he will lathe up a new end cap as modifying the original means it will probably disintegrate under the load. Next problem with the gas ram needing to be in the position it needs to be means that the safety won't work...! Never really use them so may need to redo the safety switch to operate in another way! There is a possibility that the ram is too long for this gun (was for the hatsan/webbly guns) this is a hatsan built Webbly and knowing from rebuilding my vortex hatsan I would say it would have fitted perfectly into a hatsan with no mods. Love when a project throws you it's challenge's to work outside the status quo