Saxby Palmer Revolver

Basically for each shot:

- remove front nose cone

- push in the front of the central spool to reseat the stem and its seals

- open the charging head, add the cartridge, close the charging head

- pump it up

- remove from charging head

- drop pellet into nose cone and screw onto the cartridge

- load into gun and shoot

- start again...

Accuracy-wise they use a Weihrauch airgun barrel, so its pretty accurate.

You just have to think about things like - simple revolver trigger is good but not match grade, making sure the pressure in each cartridge is pretty much the same so velocity doesnt fluctuate too much. Also if a cartidge has a slow leak it will lose power while it sits around.

So yeah, they are a lot of work, but i like them!

Its not surprising the Umarex co2 replicas gained popularity - load them up and shoot away!