Kiwi Airgunners Forum : Wanted info www.kiwiairgunners.co.nz/ This is an XML content feed of; Kiwi Airgunners Forum : Wanted : Wanted info Copyright (c) 2006-2012 Web Wiz Forums - All Rights Reserved. Tue, 26 May 2026 17:54:06 +0000 Mon, 17 Jul 2023 06:13:49 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 10.14 360 www.kiwiairgunners.co.nz/RSS_post_feed.asp?TID=843 Kiwi Airgunners Forum www.kiwiairgunners.co.nz/forum_images/logo.jpg www.kiwiairgunners.co.nz/ Wanted info : Zero’d at 16yards shooting very... www.kiwiairgunners.co.nz/forum_posts.asp?TID=843&PID=7329#7329 Author: Stuart
Subject: 843
Posted: 17 Jul 2023 at 6:13am

Zero’d at 16yards shooting very smooth then target at 35 yards 6 shots 10 mm crs with jsb 10.3 shown in photo.
Haven’t got a crono but pellet drop suggests 12.1 ft/lb sorry got that wrong about 11.2 I expect that this might increase slightly as gun settles in.
Pleased with the mods done a much nicer feel.

Edited by Stuart - 22 Jul 2023 at 9:21am]]> Mon, 17 Jul 2023 06:13:49 +0000 www.kiwiairgunners.co.nz/forum_posts.asp?TID=843&PID=7329#7329 Wanted info : Offcut of 30dia x 150mm Nylatron... www.kiwiairgunners.co.nz/forum_posts.asp?TID=843&PID=7308#7308 Author: Stuart
Subject: 843
Posted: 15 Jul 2023 at 6:27am

Offcut of 30dia x 150mm Nylatron from LEP Plastics Chch $10
O’rings Pacific seals Wellington total of 6 for piston and breech 2 sets of each for spares total $7
Nylatron specs
The closest to Oilon Nylon is Nylatron GSM which is specifically formulated with a molybdenum disulfide (MoS2) additive. This additive provides enhanced strength, rigidity, and self-lubricating properties to the material. The presence of MoS2 particles helps to reduce friction and wear, making Nylatron GSM well-suited for applications involving sliding or rotating parts.
Guy in Uk been using his setup for about 3 years with no trouble at all with extension and theViton o’ring
So I will have to get out and do some shooting and see how mine goes.


Edited by Stuart - 15 Jul 2023 at 6:47am]]> Sat, 15 Jul 2023 06:27:28 +0000 www.kiwiairgunners.co.nz/forum_posts.asp?TID=843&PID=7308#7308 Wanted info : There ya go.I'll be interesting... www.kiwiairgunners.co.nz/forum_posts.asp?TID=843&PID=7306#7306 Author: Pauly5
Subject: 843
Posted: 14 Jul 2023 at 3:26pm

There ya go.

I'll be interesting to see how the O ring setup goes for you. Good work!

Would a quick blast of heat get rid of the stringy bits? Where did you buy that material from?
]]> Fri, 14 Jul 2023 15:26:35 +0000 www.kiwiairgunners.co.nz/forum_posts.asp?TID=843&PID=7306#7306 Wanted info : Yep all good now thanks. www.kiwiairgunners.co.nz/forum_posts.asp?TID=843&PID=7305#7305 Author: Stuart
Subject: 843
Posted: 14 Jul 2023 at 2:54pm

Yep all good now thanks.]]> Fri, 14 Jul 2023 14:54:11 +0000 www.kiwiairgunners.co.nz/forum_posts.asp?TID=843&PID=7305#7305 Wanted info : Showimg up on my ph. www.kiwiairgunners.co.nz/forum_posts.asp?TID=843&PID=7304#7304 Author: kruzaroad
Subject: 843
Posted: 14 Jul 2023 at 2:52pm

Showimg up on my ph. ]]> Fri, 14 Jul 2023 14:52:20 +0000 www.kiwiairgunners.co.nz/forum_posts.asp?TID=843&PID=7304#7304 Wanted info : I had a look and can't see... www.kiwiairgunners.co.nz/forum_posts.asp?TID=843&PID=7303#7303 Author: Pauly5
Subject: 843
Posted: 14 Jul 2023 at 2:20pm

I had a look and can't see any restrictions on your profile.
Maybe Nunga will check, he knows heaps more about it.

I can see you have a couple of images uploaded, but can't see them or when you uploaded them.]]> Fri, 14 Jul 2023 14:20:37 +0000 www.kiwiairgunners.co.nz/forum_posts.asp?TID=843&PID=7303#7303 Wanted info : I don’t seem to have permission... www.kiwiairgunners.co.nz/forum_posts.asp?TID=843&PID=7302#7302 Author: Stuart
Subject: 843
Posted: 14 Jul 2023 at 1:27pm

I don’t seem to have permission to load photos

Edited by Stuart - 17 Jul 2023 at 6:15am]]> Fri, 14 Jul 2023 13:27:40 +0000 www.kiwiairgunners.co.nz/forum_posts.asp?TID=843&PID=7302#7302 Wanted info : Looking forward to seeing them.... www.kiwiairgunners.co.nz/forum_posts.asp?TID=843&PID=7301#7301 Author: Pauly5
Subject: 843
Posted: 14 Jul 2023 at 1:10pm

Looking forward to seeing them.]]> Fri, 14 Jul 2023 13:10:21 +0000 www.kiwiairgunners.co.nz/forum_posts.asp?TID=843&PID=7301#7301 Wanted info : Just got finished and Prosport... www.kiwiairgunners.co.nz/forum_posts.asp?TID=843&PID=7300#7300 Author: Stuart
Subject: 843
Posted: 14 Jul 2023 at 12:06pm

Just got finished and Prosport is much better no spring twang as with the old loose spring guide
Turned a nice tight one up in Nylatron as are the piston extension and top hat, a slight radius was required on
Seal undercut to allow fitting of the extension also needed 4 slots to allow expanding to fit a good tap with
My tapometer so this is a nice tight fit.
A bit stringy to turn but pleased with results and new seals now a lot cheaper and easy to change.
New breech o’rings aswell. The spring isn’t standard so would like to get one as this one seems a bit strong but
Will see how it goes 31coils. Hello I will get some photos on.
Shimmed side play in trigger now much better
Piston extension 17.5mm
Copied what a UK guy did but used existing undercut and didn’t need to use securing screws.
https://nbroadsman.me.uk/index.php/air-rifles/air-arms-tx200-hc-tuning

Edited by Stuart - 14 Jul 2023 at 2:49pm]]> Fri, 14 Jul 2023 12:06:27 +0000 www.kiwiairgunners.co.nz/forum_posts.asp?TID=843&PID=7300#7300 Wanted info : Turned all the parts and will... www.kiwiairgunners.co.nz/forum_posts.asp?TID=843&PID=7297#7297 Author: Stuart
Subject: 843
Posted: 13 Jul 2023 at 10:59am

Turned all the parts and will show pics as I install tomorrow.]]> Thu, 13 Jul 2023 10:59:07 +0000 www.kiwiairgunners.co.nz/forum_posts.asp?TID=843&PID=7297#7297